18V LXT Lithium-Ion 1/4 in. Oil-Impulse Brushless Cordless 3-Speed Impact Driver (Tool-Only)

The M18 FUEL SURGE 1/4 in. Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With Milwaukee's new FLUID-DRIVE Hydraulic Powertrain, users will experience up to 50% quieter operation, 3X less vibration for smoother operation and faster driving speeds compared to standard impacts. The POWERSTATE Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence is the most advanced Electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM Compact Batteries or Extended Capacity Batteries (sold separately), which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

The Makita 18-Volt LXT Lithium-Ion Brushless Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill provides 4 functions in 1 tool (model XPT02Z, tool only, batteries and charger sold separately). The versatile XPT02Z is a 4-in-1 cordless solution that can drive lag bolts, drive screws with clutch settings, drill into concrete and drill into wood, metal and plastic and more. The XPT02Z has an efficient brushless motor engineered for longer run time, increased power and speed and longer tool life. In impact driver mode, users get 3 speed settings and up to 1,330 in./lbs. of Max Torque. The XPT02Z offers both driver-drill and hammer driver-drill mode with 2 speed settings and up to 2,700 RPM. The screwdriver mode feature variable 2-speed operation (0-300 and 0-1,100 RPM) with 9 torque settings in both speed ranges. In addition, Tightening Mode (T-Mode) is a precision setting that downshifts and reduces rotation and impact speed prior to driving the screw into place and is engineered to minimize screw thread stripping, screw breakage and damage to work. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating.

The 40V max XGT Brushless Cordless 4-Speed Impact Driver (GDT01D) breaks new ground for the most demanding driving applications in wood, masonry and metal. It is powered by a Makita-built brushless motor that delivers 1,950 in.lbs. of Max Torque, outpowering other impact drivers in heavy-load applications. An ultra-smooth variable speed trigger provides optimum control and a one-touch 4-speed power selector button under the chuck allows users to adjust speed easily. Users get up to 50% faster speed with 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM and 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM), when compared to Makita's 18V LXT Brushless Cordless 4-Speed Impact Driver (XDT16). The GDT01D offers 9 modes for a wide variety of applications, including two tightening modes, one assist mode, three forward and three reverse auto-stop modes. The two Tightening Modes (T-mode) provide faster tightening of self-drilling screws in thick or thin gauge metal, which helps prevent damage to the screw or workpiece. Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until tightening begins. Three forward and three reverse Auto-Stop Modes provide increased efficiency. This impact driver is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. Reinforced gear housing provides additional durability on the job site.

The Makita 18-Volt LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 3-Speed Impact Driver (model XDT14T) is a best-in-class fastening solution for users who want more torque, longer run-time and precision fastening features. The XDT14T delivers all of the above in a compact size with a superior power-to-weight ratio. The XDT14T combines a full 1,550 in. lbs. of fastening torque with category-leading precision features. Quick-Shift Mode uses the brushless motor's electronic controls to find the best balance of speed and torque for each application for more efficient fastening. Another precision feature is Tightening Mode (T-mode), which downshifts, reduces rotation and impact speed prior to driving the screw into place and is engineered to minimize screw thread stripping, screw breakage and damage to work. These precision features, combined with 3-speed power settings, give users more control for a wide range of fastening tasks - from cabinet screws and deck screws to lag bolts and much more. It is only 4-5/8 in. L and ideal for work in tight spaces. It's part of Makita's expanding 18-Volt Lithium-Ion system, the world's largest cordless tool system powered by 18-Volt Lithium-Ion slide-style batteries. Makita 18-Volt Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.