Questions and Answers for Alexandria Moulding WM 265 1/4 in. x 1-11/16 in. x 96 in. Pine Lattice Moulding

A:  Thank you for your inqiury, Jmmstew. This Primed Finger-Jointed lattice moulding is only available in 8 ft.

A:  Boards are squared but they are not always straight. I used them for trim on a Murphy bed I made but I noticed that some were not super straight. Didn't matter to me much as I used those for smaller pieces, but if you are expecting all to be perfect the full length then you might be disappointed. Good boards though. Looked really good in my project.

A:  Hello Mark, thank you for your inquiry. The completed dimensions of these boards are 7/32 inch x 2.15/32 inches and all four edges are square. We hope this information is helpful in the completion of your current board and batten wall. Thank you.

A:  Hello Caitlin, thank you for your inquiry. The finished dimensions of this profile are 7/32-inch x 2-15/32-inches. We hope this information is helpful in the completion of your current project.

A:  Hello Nroberts, thank you for your inquiry. This item is produced in 96 inch and 192 inch lengths. Availability of the 192 inch lengths varies based on geographical location. If the longer length is not available in your location please speak with a representative at your local Home Depot about special order or alternative options. Thank you.

A:  Home Depot does not carry 12', I checked www.alexmo.com and I did not see any 12' availability.

A:  Yes, this material would work fine for door trim.

A:  Hello Cent, thank you for your inquiry. Lattice moulding is a very versatile item and can be used as an interior moulding for doors. This lattice moulding can be applied as a door stop along the inside of the door frame to stop your door from swinging through. Or, this profile can act as a very thin and simple casing profile to cover the gap between your door frame and wall. We hope this information helps you in the planning of your current project.

A:  Yes

A:  Yes well pleased with the quality! Worked well for the trime job i was doing! Highly recommend!

A:  it is not door moulding at all, it is lattice trim. it is even smaller than it says. it measures 3/16 x 1-5/8

A:  Mine are painted with a white semi-gloss alkyd paint and you cannot see the grain. Use a good quality paint.

A:  No grain showing. Excellent paint quality for just a prime coat.

A:  If painted properly this wood moulding should not show the grain at all.

A:  Hi and thank you for your inquiry. When looking at the picture, the grain shows through because it is only primed and not painted. However, when painted, it will cover the grain. We hope this helps.

A:  No the grain doesn't show but it paints poorly because of type of the primer that is being used on these lattice.

A:  The material in question is very light weight (1/4" thick) and, in my opinion, would not hold up to exterior usage. If you are going to use it for an exterior application, I would make sure that I use a good oil base primer.

A:  Probably not, wood rots, use the pvc!

A:  I used it for interior use only. If you use it for exterior use make sure you paint it with exterior primer and paint.

A:  The paint they use it for priming it may be an interior paint. Probably pretty cheap primer. I wouldn't chance it.