Questions and Answers for Annin Flagmakers Estate 3 ft. x 5 ft. Nylon U.S. Flag with 6 ft. Spinning Flagpole and Fasteners

A:  The US Flag is made in South Boston, VA.

A:  Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is, put the flag grommets over the hole put the screw back on and tighten the screw the flag will stay

A:  The top on mine is a round silver plastic one. This flag and pole are great, spins when the wind blows and doesn’t get tangled. Would recommend!

A:  It's plastic.

A:  It is metal. I love that flag. We put it out on beautiful day with special holidays.....

A:  Hello Erik, Thank you for interest in our products. The gold ball on top of the spinning pole is plastic with a gilt finish. Please let us know if you have any further questions. Laura Annin Customer Service

A:  Chrome plated plastic.

A:  No. It just has one slot to accept a single pole.

A:  If you mean in addition to the existing flag below it, there are no clips for additional flags. you could add the 2nd flag below it if you can duct tape clips to the pole.

A:  Yes Pete, I have purchased this beautiful well made nylon flag from Home Depot in 2017, and it has been left out all year round. It still looks new to this day despite all seasons. To answer your question on whether you can hang another flag of any size to this pole the answer is Yes. The reason is because this heavy duty flag pole that is 1" in diameter has two white flag ring hooks which are adjustable, meaning that you can attach any flag size as long as your flag come with two eyelets (grommets) that are 3/8" (10mm) in diameter already sewn-into the flag, which most flags of any size have. You simply attach the flag to both of these flag pole ring hooks. Stay healthy, and safe.

A:  If you mean add a second flag below the 3'x5' flag there won't be any hardware to attach the second flag with unless you come up with your own pole mounting device for the flag.

A:  No, you cannot add another flag, this is for one flag only.

A:  I had the same problem and ended up buying another flag. These things are made to break. Don’t expect to get more than a year out of a flag if you fly it 24/7.

A:  I would look up Annin flagmakers on the internet. Just Google it, go to their site and find out where you can get parts. I usually have good luck on Google. Keep flying that flag!

A:  Yes, but the mounting screws are silver colored.

A:  Yes - Bracket & pole are white and look good.

A:  Yes! I thought silver would look better myself, as some of the separate Annin flags and accessories (at Target) are. But white really compliments our siding and white trim, and I believe it would do so for 99% of all homes! It's awesome! So PROUD of this flag and system, as absolutely flawless and beautiful!

A:  Yes, the pole and bracket are both white for this set.

A:  Yes. Mine is.

A:  the pole is aluminum the bracket and pole are painted white

A:  Yes it is, but silver colored screws.

A:  Approximately 2"

A:  The mounting bracket is 2.5" x 3".

A:  The mounting Bracket is metal, it is 21/2 inches wide by about 3" high and the (4) 3/16 screws go into holes 1 7/8" apart on top and bottom. It should fit on a garage door moulding depending on the width of the moulding.

A:  The pole has permanent fasteners for a 3 x 5 flag. So, It wouldn't work for a 2 x3 flag.

A:  Yes mounting fasteners are adjustable.

A:  Yes, and yes. The mounting hardware can adjust to any size 3 X 5 or smaller.

A:  The Estate set contains a 3x5 flag, 6 ft spinning pole and bracket, so this would not be what you need. If you want to purchase a spinning pole for a 2x3 ft nylon flag, you would order #1988 which is 5 ft long, 1" diameter. This pole is rust-resistant.

A:  Yes, the fastener slides up & down to adjust to the flag width & then you tighten a screw to hold it in place. The pole is 6" & rust resitant.