Questions and Answers for Bond Manufacturing Napa Valley Fountain

A:  Hi Curt, this fountain is about 45" tall. We hope this helps!

A:  appt: 47 " tall

A:  Hi Rick, thanks for reaching out! Yes this fountain is textured, in fact, many of our customers post videos on social media of this fountain and the birds it's attracted. We hope this helps!

A:  My birds love it

A:  No

A:  Hi Rick, thanks for reaching out! This fountain is made of Envirostone, which is a premium blend of crushed stone and resin. Due to its makeup, it is not designed to be submerged in water, nor do we recommend adding drain holes. To learn more, please give us a call at 1.866.771.2663 M-F from 8 am - 4:30 pm PT. We hope this helps!

A:  You may have to weight the base down, so it doesn't float, and maybe check with the manufacturer regarding an aquatic type power supply if your cord will be in/near water. Your bottom basin must be different than mine, because my bottom basin doesn't have any holes.

A:  I wouldn't think so. The first part of the tower is in in the bottom dish about 5" and hasn't shown any problems.

A:  I use an outdoor rated extension cord, the type used for outdoor Christmas lights, rated for water, snow,etc.

A:  Hi Suz, an all-purpose extension cord will suffice. We hope this helps!

A:  I use a heavy duty three prong extension cord suitable for outdoors. How's beneath my deck so appearance is not an issue. Pleased with fountain enjoy.

A:  The pump does not draw many amps, but you do need a 3 prong cord. You can get by easily with a 16 gauge cord, but I would seal the connection to make it waterproof and elevate it in the bottom of the base to keep the connection off the ground.

A:  Any heavy duty 3-prong extension cord will do.

A:  plastic

A:  Actually it's made of a molded resin. Biggest problem is that if it is in the direct sun, it will fade out over one summer. If you don't mind repainting it every year or two, it works just fine.

A:  Hi there! This fountain is made of Envirostone, which is a premium blend of resin made for outdoor use. We hope this helps!

A:  This fountain is constructed of Envirostone, which gives the appearance of stone without all the weight of it.

A:  Neither. Paperwork doesn't state what it is made of. Bond Manfacturing @1-866-771-2663 (PST), or customer. service@ bondmfg.com

A:  It is made of fiberglass.

A:  Yes, there is a cord and it is about 6 to 8 feet long.

A:  The cord on the pump is approximately 67 inches long , since it's outdoors, I plug mine into a GFCI outlet.

A:  I had power too our old fountain so the new connection was made under the base of the new fountain. The cord is about 5 foot long so I had plenty of cord to make the splice to the existing power source

A:  yes electric pump and 8 ft long

A:  The cord extends from pump about 4-5ft. It is placed in upper tier of fountain so about 18in. is used to get to the base. Will need a 3-prong receptacle.

A:  There needs to be a connection to an outlet. The cord is about 4 feet long. I have had mine for. Year and a half and the pump still works, the fountain is in good condition and the cord hasn’t faded or cracked.

A:  Yes you can leave it outside and I wanted to but it must be covered so water doesn't get in it but I had a problem with that it leaks I contacted Home Depot from the stop but I got no response sit all expectantly Service from Home Depot they're really don't care

A:  This is roughly 48" high, it cannot be left out.

A:  Not sure what you mean by length but the height is roughly 48 inch and the diameter of the largest bowl is roughly 36 inches. as far as leaving it out during the winter. I live in Texas and I left mine out and running year round. if you live in the frigid north I probably wouldn't want to do that. After a few years this material will break down and start to crack. I think mine lasted about 5 years and then I had to throw it away.

A:  This will need top be covered or it will deteriorate over time. it will withstand some weather but for long term use it would be best to cover it. This fountain is only around 4 ft tall it gives the specs on the web site. It is not as tall as it looks on the pictures

A:  The height is approximately 48 inches and the diameter is approximately 16 inches. I wouldn't leave it out over several winters. They do make covers for fountains that would work to leave it out. If water is left in it, the freezing will start to break up the finish over time.

A:  I'm not sure what you mean by what is the length,rough guesstimate without going to the website, I'd say 45 inches tall if not more, I'd measure mine, but it's disassembled in the basement for the winter, and to answer your second question abut leaving it outside over the winter, depends on where you live, I live in the snow belt of Ohio, I wouldn't leave the pump in the fountain over the winter, plus the fountain material is a resin, I would be afraid in the cold that it would crack in extremely cold temps. Hope this is helpful.

A:  By length do you mean height? I can't measure that until I set it up again this year. It is fiberglass so I take it apart and store it away for the winter, I wouldn't recommend leaving it up if you are in an area that experiences any freezing temperatures.

A:  Roughly 48 ins.

A:  It is about 4' tall. Take time to level it when you place it for nice flow.