Questions and Answers for Everbilt 1/2 in. x 4 in. MIP Brass Nipple Fitting

A:  We suggest calling the store directly and speaking to a plumbing associate to find out if they have the ability / equipment for this action.

A:  This fitting is lead free and can be used for potable water.

A:  The fitting is 1.3” from end to end.

A:  This is made from Yellow brass. Red brass has more of a Reddish- Orange tint almost a rust color. like Copper. I hope this helped you.

A:  This is yellow brass.

A:  This fitting is yellow brass.

A:  Color is yellow

A:  This item is Yellow Brass, Red brass has a Reddish -Orange tint to it almost like Copper. I hope this helps with your question.

A:  Yes, it is safe for drinking water.

A:  Yes, this fitting is NSF 61 and 372 certified for potable water.

A:  For this application, it depends on how the plumbing was run from the valve to the stub out and how the tub spout attaches (threaded vs Slip on). Also the tub spout will determine how far out of the wall the stub out needs to be as many manufactures have different requirements. While 1/2” is very common there are some systems that use other sizes (ex. 3/4”).

A:  Yes. Perfect for tub spout

A:  Thanks

A:  As long as the working pressure is less than 125 PSI and it is not in ground contact it will work.

A:  It works but with pvc it’s super easy to cross thread or strip out the plastic. Don’t over tighten or the fitting will strip or crack your pvc.

A:  Yes, the only time you have to be cautious is potable (drinking) water. Make sure there is no lead in the metal makeup of the pipe. Also, support every thing because the cutting of threads weakens the nipple.

A:  Sorry - lead-free is right in the item title... didn’t see it in the specifications initially. Bought the part, does what I needed it to do

A:  Only if the package has a statement from the manufacturer and you trust the source.

A:  Yes, this fitting is lead-free.

A:  This Lead-Free Brass Pipe Nipple meets the NPT standard and is NSF 371 and 61 certified.

A:  I just bought these nipples, the threads are 9/16" of an inch on mine, I bought them to replace some fittings that were made in China that leaked, these are good fittings.

A:  The effective thread length is 0.5337", measured from thread top end.

A:  The part number for the closed female end cap that would fit on one end of this 3/8” nipple is 802139, store SKU 716-934, 3/8 in. FIP Lead-Free Brass Pipe Cap.