Q:I might have lost pin? Or is it in the round device? I didn't see the adjuster I'm probably throw it away
by|Jan 15, 2024
0 Answer
Answer This Question
Q:What weight is considered a heavy duty hinge? What is the weight and/or gauge of this particular
T-Hinge? Everbilt 8" Decorative T-Hinge Heavy Duty
by|Jan 30, 2022
2 Answers
Answer This Question
A: The weight rating for the Everbilt 8 in. Black Heavy-Duty Decorative Tee Hinge (2-Pack) is 50 lbs per hinge.
by|Feb 1, 2022
A: My micrometer measures .0940 inches thick.
by|Feb 3, 2022
Q:What is the weight capacity for a pair of these hinges?
by|Jul 11, 2020
3 Answers
Answer This Question
A: Yes. The hinges are supporting a 4’ gate and they seem to working well
by|Oct 7, 2020
A: The safe working load for this tee hinge is 50 lbs. per hinge.
by|Dec 11, 2020
2 found this answer helpful
A: For 6” hinge I found (The Safe Working Load Limit per hinge is 50 lbs.). The 8” hinge is probably close to it or a bit more but doesn’t say.
by|Nov 13, 2020
Q:I need to know the dimension of the section mounted on the gate. What is the length from the hinge pin to the point of the of the triangular gate section? Thanks
by|Mar 24, 2016
4 Answers
Answer This Question
A: From the center of the hinge pin to the very tip is 7 5/8 "
by|Jun 25, 2019
A: From the hinge pin to the triangular tip is 8". The height of the hinge is 5".
by|May 5, 2023
1 found this answer helpful
A: 8 inches
by|May 14, 2019
A: Eight inches I’d say
by|Jun 9, 2020
Q:the hinge is designed for a left hand application. if i simple turn the hinge 180 degrees for a right hand application, the hinge pin head is at the bottom of the hinge which doesnt make any sense. over time the hing will wear and the hinge pin will loosen and fall out. the hinge pin head should be at the top of the hinge. Do I need to hammer out the pin and reset it in the opposite direction for a right hand application?
by|Nov 6, 2014
4 Answers
Answer This Question
A: I knocked the pin out and put in from the other side, worked perfect.
by|Oct 30, 2019
A: it work either way the pin isweld in place
by|Oct 10, 2020
A: take a punch and knock the pin out then put it in the other way
by|Aug 6, 2023
1 found this answer helpful
A: For right or left-hand applications, so yes, you would need to pop out the hinge pin and drive it in from the top.