Questions and Answers for Fasade 18 in. Inside Corner Trim in Crosshatch Silver

A:  Yes they are square. 18x18.

A:  Yes, it is s square. It is tiled plastic. I used it in my kitchen and LOVE it. It’s easy to cut as well .

A:  The backsplash pieces are 24 1/2 by 18 1/2

A:  Thank you for your interest in our Inside Corner Trim in Crosshatch Silver. Our trim component is 18" in length and approximately 1/2" thick. The trim component can accommodate a panel up to .07" in thickness, plent of room for our Fasade panels to fit in your installation. If you need any additional measurements please contact our customer care team at 800.434.3750. Thank you!

A:  They are 18" x 18". You can use double sided tape, liquid nails or other construction adhesive. I would recommend liquid nails/adhesive.

A:  Lori, The dimensions of the panels are 18x24 I put mine up with construction adhesive and a caulking gun The do sell double sided adhesive tape for the panels. The corner pieces are 24 inches long you cut it to fit the size piece you need. This installs very easily, and looks fantastic!

A:  Thank you for your questions. The 18" Inside Corner Trim in Crosshatch Silver is 18" in length, making it the perfect size for an inside corner in your backsplash installation. The installation for the trim piece would be the same installation method you choose to use for your backsplash panel installation; either double sided tape or PL Premium by Loctite. If you have additional installation questions or any further dimensions please feel free to contact our customer care team at 800.434.3750 and we would be happy to assist you. Thanks again!

A:  It is either a liquid nails type adhesive or double sided tape.

A:  It is applied with either double-sided tape or liquid nails. Any construction adhesive would work. due to the cost of the tape I would suggest the construction adhesive.

A:  No it is not self stick. I used liquid nail to put mine up. I don't know about covering drawers with it, you would have to really cut the panels up.

A:  Thank you for your questions! The 18" Crosshatch Silver Inside Corner Trim is not self adhesive, it can be applied using the same adhesive you are using on your panels. The inside corner pieces are approximately .75" in height and are used either to create an inside corner return for backsplashes and ceiling panels, or to help hide the cut edge or the end of a run on your backsplash. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  Is this self stick...if not how is it applied

A:  Thank you for your interest in our product. Yes, all of our products are considered a DIY project. Please feel free to contact our customer care team at 800.434.3750 for further questions or assistance in your installation. Thanks again!

A:  Yes, just take your time.

A:  Here is the Fasade website for the trim accessories. It has a link to their online store. https://fasadeideas.com/backsplash/backsplash-accessories/

A:  Go online and search for the trim needed. I purchased the outlet cover wrap online as none of the big box stores had it available.

A:  Hello! Thank you for your question! You can special order this outside corner trim (161) by contacting or visiting your local Home Depot stores special service desk with this request. To locate a store near you, please click on the “store locator” found on the top of each page. If you have any additional questions, please contact our Customer Care department at 800-430-3376. Thanks!

A:  It is safe behind a cook stove or a zero clearance heat stove. But would not be safe for any other type heat stove

A:  Hello! Thank you for your question! Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The panels can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 3 inches away from the backsplash panel’s surface.

A:  Hello! Thank you for your question! Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The panels can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 6 inches away from the backsplash panel’s surface.

A:  I ordered online and had them shipped to my local Home Depot.

A:  Thank you for your question. If you cannot find the trim accessories online, you can place an order with your local store associate or call our customer care department for troubleshooting (800.434.3750).