Q:Is it easy to modify this dryer to right side venting?
by|Jan 31, 2015
1 Answer
Answer This Question
A: Hello - this is Nancy at GE and I am happy to help you. This dryer can be vented through the rear, right, left and bottom. If you are going to vent the dryer out of the right side, please follow the Installation Instructions carefully. You will have to remove the knock-out plug as well as add an elbow and ducting. I hope this helps! Thanks for checking with us!
by|May 3, 2023
Q:CASE DEPTH
by|Oct 21, 2014
1 Answer
Answer This Question
A: Hello - this is Nancy at GE and I am happy to help you. The overall depth of the dryer more accurately reflects the depth, which would be 25-1/2". The measurement includes the protrusion in the back of the dryer. You should also allow for a 3" air clearance in the rear of the dryer. I hope this helps! Thanks for checking with us!
by|May 3, 2023
Q:What is the model # of the matching washer?
by|Jul 5, 2014
1 Answer
Answer This Question
A: Hi-this is Sue from GE. Thanks for your interest!
We suggest to view our matching GE GTWN4250DWS 3.9 cu. ft. High-Efficiency Top Load Washer in White:
http://www.homedepot.com/p/GE-3-9-cu-ft-High-Efficiency-Top-Load-Washer-in-White-GTWN4250DWS/203322223?keyword=gtwn4250d
Thanks for checking with us. Enjoy!
by|May 3, 2023
1 found this answer helpful
Q:spin and rinse info please
by|Aug 13, 2012
1 Answer
Answer This Question
A: Hello,
Thank you for your interest in GE washers.
The model number you provided is for a dryer, GTDX400EDWS. In order to dertermine what kind of rinse cycle it offers, I will need a model number for the washer.
Donna with GE
by|May 2, 2023
Q:Does the GTDX400EDWS dryer take a 3-prong outlet?
by|Jul 30, 2012
1 Answer
Answer This Question
A: Hello Subo,
This is Donna with GE and I am happy to help. with your question on the dryer.
Electric dryer power cords are sold separately to ensure that they comply with all state and local wiring codes. These codes vary significantly from state to state, and even, city to city. Since it is not possible to anticipate the final destination of a dryer as it leaves the assembly line and install the proper cord, the local dealer usually provides the power cord. Power cords can be 3 prong or 4 prong. Four prong dryer cords are required in new installations beginning in 1996
An electric dryer needs a properly grounded branch circuit with a 3 prong grounding type receptacle
is required for all GE dryers.
* One 240/208v 30 amp circuit breaker or two 30 amp fuses are required for an electric dryer.
I hope this helps!