Questions and Answers for Husky 1/2 in. Drive 10 in. Extension Bar

A:  Steve, This extension is desinged for access in lower torque applications.

A:  Dmoon, This is manufactured of Chrome Alloy steel and Nickel Chrome plated

A:  Tool isle

A:  Do not remember - noted the aisle online.

A:  It’s simple just pull it off if you don’t have a good enough grip with your hands grab ahold of it with a pair of linemen pliers, vice grips, adjustable wrench etc.

A:  Hey Husky, On the Husky 3/8 in. Extension bars the label should just pull out of the end. Sometimes it helps to rock it back and forth a bit as you pull. Thanks!

A:  I breaks right off.

A:  Hey Leo, It would only fit onto a 1/4 in. drive ratchet if you used an adapter. Otherwise you'd need to use a 3/8 in. drive ratchet. Thanks!

A:  Hi there, I have had this extension almost 1 year and I use it at times with my Rigid impact driver which puts out our 100lbft (~145lbft) and this extension works fine with it. As with all flexible extensions they are there to help you access and tighten in tight spots. I have not used it with a torque wrench with specific torque settings. This flexible attachment is best used at lower torque for bolts that are hard to access - so use this attachment to start it and then torque it down properly with the driver or wrench once the bolt is seated.

A:  I managed to permanently bend this extension with hand-torque only trying to budge some spark plugs.

A:  This is a 1/2 In Extension, meaning that it is a 1/2 x 1/2 5in Extension. What you may be looking for is a 1/2 in. Female to 3/8 in. Male Drive Adapter. Here is a link to this item. https://www.homedepot.com/p/Husky-1-2-in-Female-to-3-8-in-Male-Drive-Adapter-HADPTR1238/205543651

A:  Hey Jen, It is 1/2 female at one end and 1/2 male at the other end. Thanks!

A:  No is is 1/2

A:  No. It is 1/2

A:  no 1/2 inch which is why the name "1/2 drive"

A:  Yes it will, I went bought it and used it within the first few hours of having it and it worked amazingly.

A:  It should. Both are 1/4 inch drive.

A:  Hey SK, It should fit without issues on any 1/4" drive ratchet. Thanks!