Questions and Answers for InSinkErator Garbage Disposal Air Switch Kit, Dual Outlet Sink Top Switch Button for All INSINKERATOR Models, Satin Nickel STS-OOSN

A:  Hi Jedi, thanks for reaching out! For best results, we recommend you use InSinkErator parts and accessories with InSinkErator units. In general, we do not test our products for compatibility with other manufacturers' parts and products, so we cannot speak to the expected performance when used together.

A:  Hello John, thank you for your question. We recommend using InSinkErator parts and accessories with InSinkErator units. We can't guarantee the compatibility of our products with parts or products made by other manufacturers, so we can't assure you of their performance when used together. However, if you have installed the part or unit properly, you shouldn't expect any issues unless otherwise stated in our product manual. Nonetheless, please note that any non-recommended modifications may affect the safety, use, or performance of the product.

A:  Hi Nick, thank you for your question. This air switch will not work at your disposal if it uses a magnetic stopper to operate. If you have other concerns, please don't hesitate to reach out to us through https://support.insinkerator.com/app/ask.

A:  Hi Frank, I appreciate your inquiry. Our dual-outlet sink top is rated at 120 volts and 12 amps. If you have other questions, you can contact us directly at https://support.insinkerator.com/app/ask. Thank you for choosing InSinkErator.

A:  Hi Diane, thanks for your inquiry. Our InSinkErator sink-top switch requires a power outlet to work. It is surprisingly easy to install and can be done without the help of a professional. To learn more about how to install it, you can refer to this installation guide available online: https://shorturl.at/klUZ0.

A:  Hi Steve, thanks for the inquiry. The sink top switch button will fit into a hole with a 1 1/4 to 1 1/2 inch diameter. If you have any questions or need assistance, feel free to reach out to us directly at https://support.insinkerator.com/app/ask.

A:  Yes

A:  Hi Microman, thanks for the question. The InSinkErator Dual Outlet Sink-Top Air Switch is for use with all disposers. It has a remote push button that uses air pressure to activate the power module, located under the sink. When pressed, the Sink Top Switch sends a pulse of air down the air tube, triggers the remote switch, and activates the disposer. The power module's outlets are controlled by an internal alternate-action switch. This means either one or the other outlet will be energized at all times. When you push the Sink Top Switch button, you switch electrical power between the two outlets on the power module. This feature allows a second appliance to be plugged in and momentarily interrupts its power to run the disposer. The power module automatically turns the second appliance back on when the disposer is switched off. We recommend reaching out to a professional electrician or the manufacturer of the motor for specific recommendations.

A:  Hi John, thanks for the question. The required hole diameter is 1 1/4" to 1 1/2". Check out the specs here: https://shorturl.at/pADLT