A: Klein Tools ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and butane at concentrations as low as 50 ppm.
by|Apr 19, 2024
Q:Can this detect gasoline fumes?
by|Apr 18, 2024
1 Answer
Answer This Question
A: Klein Tools ET120 is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and butane at concentrations as low as 50 ppm.
by|Apr 18, 2024
Q:Does this brand detect ammonia
by|Mar 7, 2024
1 Answer
Answer This Question
A: No
by|Mar 7, 2024
Q:Does this detector still detect gasses with the mercaptan additive scrubbed out? Mercaptan is an harmless odor added to odorless gas.
by|Mar 1, 2024
1 Answer
Answer This Question
A: Yes
by|Mar 6, 2024
Q:Does it tell you what kind of gas it is detecting?
by|Jan 9, 2024
1 Answer
Answer This Question
A: No
by|Feb 3, 2024
Q:Post repairs to the burner assembly on my hot water heater, I soaped up the gas connections and not a bubble to be seen. BUT, my Klein ET120 shows 2 bars on the alarm when I put the sensor at the top of the Honeywell HydroSense Controller.
by|Nov 14, 2023
1 Answer
Answer This Question
A: For assistance with your Gas Leak Detector please contact Klein Tools Customer Service at 1-800-553-4676.
by|Nov 15, 2023
Q:If the device last for a specific amount of time, is there a manufacturer date so I know not to buy one on the shelf that has been there for years.
by|Nov 11, 2023
1 Answer
Answer This Question
A: The sensor life expectancy is 5-7 years. When ALL lights on the tester are illuminated, the sensor has failed and the unit must be serviced. Contact Klein Tools at 1-877-775-5346 or customerservice@kleintools.com for further details.
by|Jan 23, 2024
1 found this answer helpful
Q:Does this meter require calibration?
by|Sep 28, 2023
1 Answer
Answer This Question
A: Operating instructions: In an area where combustible gas is known to be not present, press the power button for 3 seconds. The tester will beep and start a 50-second zero-calibration process while the first indicator light blinks. Once complete, all indicator lights will blink for one second, then the HIGH indicator light will illuminate and continue to flash, indicating it is ready to take a measurement.
The sensor life expectancy is 5-7 years. When ALL lights on the tester are illuminated, the sensor has failed and the unit must be serviced. Contact Klein Tools at 1-877-775-5346 or customerservice@kleintools.com for further details.