Questions and Answers for MSI Calacatta Marbella Peel and Stick 12 in. x 12 in. Honed Marble Floor and Wall Mosaic Tile (1 sq. ft./Each)

A:  Thank you for your interest in MSI Calacatta Marbella Peel and Stick 12 in. x 12 in. Honed Marble Floor and Wall Tile Please see the below link to order the case buy pack which comes in 15 pieces per case and covers approximately 15 sq/ft per case. Good luck with your project. MSI Calacatta Marbella Peel and Stick 12 in. x 12 in. x 6 mm Honed Marble Mosaic Tile (15 sq. ft. / case) PNS-CALCREIL3D - The Home Depot

A:  I used metal trim looks great

A:  Thank you for your interest in MSI product. Please note it is recommended to use the bullnose, molding to finish the edges, However please see the below matching bullnose, moldings available for Calacatta Marbella. Good luck with your project. MSI Carrara White Pencil Molding 3/4 in. x 12 in. Polished Marble Wall Tile (20 lin. ft. / case) SMOT-PENCIL-CAR - The Home Depot MSI Whisper White Quarter Round Molding 5/8 in. x 6 in. Glossy Ceramic Floor and Wall Tile (2.5 lin. ft. / case) QTRRD-WW5/8X6 - The Home Depot MSI Water Color Bianco Bullnose 3.5 in. x 24 in. Matte Porcelain Wall Tile (24 lin. ft./Case) NWATBIA3.5X24BN - The Home Depot MSI Dolomite Pencil Molding 0.75 in. x 12 in. Polished Marble Wall Tile (20 lin. ft./Case) PENCIL-BIANDOL - The Home Depot MSI Madison Celeste Bullnose 3 in. x 18 in. Polished Porcelain Wall Tile (15 in. ft./Case) NHDMADCEL318BNP - The Home Depot MSI Ader Dolomite Bullnose 4 in. x 24 in. Polished Porcelain Floor and Wall Tile (20 lin. ft../Case) NEDED4X24BNP - The Home Depot

A:  Thank you for your interest in MSI product. Yes, you can install a peel and stick backsplash over ceramic tile. The key is to ensure the surface is clean, level, and free of dust and debris before applying the new backsplash. There are two ways peel and stick backsplash tiles can successfully adhere to ceramic tile. Good luck with your project.

A:  Thank you for your interest in MSI product. Please note it is recommended to use the penetrating selaer for the tile, and although it may not change the color of the surface, it can give it a nice shine and a stain-free, overall cleaner look. Good luck with your project

A:  Thank you for your interest in a MSI product. Please contact a professional installer to check on the maintainability and suitability of this product for your project. Good luck with your project.

A:  Thank you for your interest in a MSI product. Please see the following link to know about the Installation Instructions for this material, https://images.thdstatic.com/catalog/pdfImages/6a/6a2f2320-3f9b-4043-993e-4a69aae764f1.pdf Good luck with your project.

A:  It does not matter, once you put the tile on the wall, it is STUCK! If you need to take it off you are going to take a layer of drywall with it.  

A:  The Marbella to my mind is perfect, tones nicely, subtle compliments the white, clean and functional. The opposite decision is whether you want drama and impact by adding another color backsplash, this of course is entirely up to you, so at the end of the day the question is more yours.

A:  the marabella marble should work fine // the color is white & grey just look at the Home Depot color chart

A:  Thank you for your interest in a MSI product. Please contact a professional installer to check on the maintainability and suitability of this product for your project. Good luck with your project.

A:  Thank you for your interest in the MSI Calacatta Marbella Peel and Stick Tile. This tile may require additional adhesive. The tiles are easy to cut if you are cutting at the break in stone, otherwise we recommend a wet saw to cut these tiles. These tiles will interlock with eachother so there is no worry about lining them up. Good luck with your project!

A:  You have not done your research on this product //1st peel back the adhesive cover paper to apply , you may need additional adhesive to help the tile stick to the area you will apply it to // each sq. will interlock with each other // recommend you purchase tile cutter pliers to help with the proper fit // scissors can be used to cut strips from each tile square for proper fit // once you finish your project you will be pleased // also advise you go on line to see peal & stick tile application projects to help you with your project // Remember this tile is not a perfect square it does interlock // Have fun 0

A:  To cut between the tile squares you can use scissors or razor knife. To cut the tile use tile snips. And no need for extra adhesive. This stuff is strong. Just follow the instructions. Once this stuff is on, it is ON! I added it to my kids bath tub... a year ago... perfect still!