Questions and Answers for Porter-Cable 2 in. x 15-Gauge Finish Nail Glue Collated (1000 per Box)

A:  Hello Jay669 Thank you for your contact. We apologize for any trouble or inconvenience in finding information. On this issue, please reach out to PORTER-CABLE directly so that we can work together to resolve this issue for you. Thank you for your cooperation in this matter. Best Regards Sherri C PORTER-CABLE

A:  I used a large compressor set on 135 psi and was able to set the 15 gauge nails using a Dewalt Finish Nailer easily. I'm not sure what pressure yours is set to, but it may need to be higher. Hope this helps.

A:  Worked great in my DeWalt 15 gauge finish Nailer.

A:  These are at a 34 degree angle. I hope this helps!

A:  yes but will bleed right through the paint after 5 years

A:  This product is for indoor use.

A:  This nail is designed for non structual indoor use only. It will eventually rust, or cause rust stains if used in Cedar, Redwood and Pressure Treated. Even if you set the depth below the wood surface and caulk over the nail head it can bleed rusts stains. You'll need to search for a Stainless Steel nail approved for use in ACQ Pressure Treated or common outdoor woods like cedar and redwood. If you don't mind the stains and rust it works well in craft items like birdhouses.

A:  I have used these on exterior trim and they will rust. I make sure to cover the nail head with caulking or plenty of paint. I hope this helps!

A:  They are not galvanized or otherwise treated to prevent rust Keeping that in mind, it's a nail. In side or outside if you shoot it in it will hold