Questions and Answers for Quikrete 1 Qt. Concrete Patching Compound

A:  QUIKRETE Concrete Patch Compound can be used for repairs to fill surface imperfections and cracks up ¼ inch (6 mm) deep in concrete, masonry and stucco. Do not use it in any areas that can be exposed to temperatures greater than 180 °F. Please note that this material is an acrylic latex formulation that is not meant for structural repairs. The repair surface must be sound, clean, unsealed/uncoated, and free of dirt, dust, loose debris and any other potential bond breakers. When making repairs, getting a good color match will be difficult. We recommend trialing the repair material in an inconspicuous area and waiting a minimum of 24 hours to ensure the appearance is acceptable before proceeding with the project.

A:  No, this is a ready to use product and can be applied directly out of the package. This is a moisture activated product, so tightly reseal the container to preserve any remaining product for future use. Read our technical data sheet at Quikrete.com for more application instructions.

A:  QUIKRETE® Concrete Patching Compound (No. 8650-35) is a ready-to-use, trowel applied acrylic latex formulation for making repairs to cracks, holes and breaks up to 1/4" deep in concrete, stucco or masonry walls, sidewalks, patios, driveways, etc.

A:  QUIKRETE Concrete Patching Compound is a ready to use trowel applied acrylic latex formulation for crack and spall repair for concrete, stucco or masonry walls, sidewalks, patios, driveways, etc. We do not recommend adding integral color to the material. It can, however, be painted using latex paints only. Please wait at least 24 hours after application before painting.

A:  This product can be lightly sanded after curing, typically 72 hours.

A:  QUIKRETE® Concrete Patching Compound repairs and fills spalls (surface imperfections) and cracks up to ¼” (6 mm) deep in concrete, masonry, stucco, sidewalks, patios, and driveways and is not intended for this kind of application. You may have success with QUIKRETE® Advanced Polymer Construction Adhesive (No. 9902-10), which is a solvent and isocyanate free line of high-performance, commercial-grade material that permanently bonds concrete, masonry, brick, veneer stone, foamboard, drywall, wood and plastic in minutes. Designed to deliver or exceed the performance of traditional polyurethane or silicone sealants and adhesives, the single-component QUIKRETE® Construction Adhesive is an environmentally-friendly alternative that meets meet ASTM C920 standards. Available in 10-ounce tubes.

A:  Please call our customer support representatives at 800-282-5828 for more assistance.

A:  Depending on how much of the concrete is raveling (crumbling), several products are appropriate. We recommend QUIKRETE® Polymer Modified Structural Repair if the area to be repaired is subjected to traffic. For other recommendations, please contact our customer service at 800-282-5828.

A:  QUIKRETE® Concrete Patching Compound can be used to cosmetically repair concrete, although we do not recommend it for vehicle-traffic areas.

A:  QUIKRETE® Concrete Patching Compound will bond to clean, dry backer board.