Questions and Answers for Rockwell Blade Runner X2 Portable Tabletop Saw

A:  Hello there. Thank you for your question. The Bladerunner’s guide arm has a vacuum attachment port for dust removal. The vacuum adapter directly accommodates a 1-1/4” hose, a common size for most workshop vacuums.

A:  Hi James! Thank you for your question. None. This is not a battery-powered unit, it needs to be plugged into an electrical outlet. -DestyneeE

A:  None. This is not a battery powered unit, it needs to be plugged into an electrical outlet.

A:  Hello Valued Customer. Thank you for your question. No, only 4-inch T-shank blades will fit in the Rockwell Bladerunner.-DestyneeE

A:  Hello Lele. Thank you for your question. The wood cutting capacity is 1-1/2 inch. DestyneeE

A:  I’ve cut up to 1 1/2” wood on it. It cut fine but slow.

A:  MUST USE A VERY FINE BLADE

A:  Oh, for absolutely certain? It will accurately rip or crosscut hard woods, softwoods, or plywood up to 1/2 thick, easily. Depending upon the blade you choose to install it will cut quickly or very smoothly. The saw eliminates the danger of larger saws, but provides excellent performance. The saw is easy to use and maintain.

A:  Yes. It cuts thin material well. But only thin matertial. Anything much over a quarter inch thick of so, I would go with another saw.

A:  Hello John! The 5.5 amps of power give the Rockwell Blade Runner X2 Portable Tabletop Saw the capacity for light to the moderate cutting of wood (up to 1-1/2").- HeavenJ

A:  Hello Valued Customer, thank you for your question. We advise reading the Owner's Manual carefully before operating the Rockwell Blade Runner X2 Portable Tabletop Saw. See Blade Installation Fig. B1-B3 in manual. Should you have any additional questions or concerns, please contact our Solution Center Team at 866-514-7625 Monday through Friday from 9 am until 6 pm EST. We'd be more than happy to assist you. Thank you for choosing Rockwell Tools!- Heaven J

A:  Under the info and guides there are step by step instructions in pictures to install the blade. you can also follow the link. https://images.thdstatic.com/catalog/pdfImages/4d/4d5f1953-90f6-4076-b7f1-d9e1c41dc0d7.pdf

A:  There is a little button on the buttom of the table, push that and insert the blade.

A:  The blade goes in the bottom part. There is a little red "trap door" that opens and the blade is inserted there and sticks up.

A:  Hi Mona! To keep your shipping cost to a minimum, the Rockwell Blade Runner does ship with minor assembly required. Attaching the guide arm and installing a blade will take less than 5 minutes and require no tools. It has a stroke length of 3/4” and can handle rip cuts in wood up to 1-1/2". Rockwell appreciates your patronage!

A:  The saw comes assembled and only the safety arm needs to be installed. This takes only a few minutes to put together. The challenge to the minimum gauge it can cut is holding the wood in place during the cut. If you have longer pieces you will be fine. This saw can definitely do this.