Questions and Answers for Rust-Oleum Parks Pro Finisher 1 gal. Clear Gloss Water-Based Polyurethane for Floors

A:  Thank you for reaching out. While Rust-Oleum Parks Pro Water-Based Polyurethane for Floors provides a protective floor coating, we do not recommend applying with a sprayer due to the fast drying nature of this type of finish. Spraying could cause moisture to become trapped in the coating, could cause bubbling and more than likely dry spray. -Rust-Oleum Product Support 14

A:  We're happy to clear things up, Dave. We recommend applying Rust-Oleum Parks Pro Finisher Water-Based Floor Polyurethane using a Pro Finisher Universal Applicator, Lambswool applicator pad, polyester brush, or a weighted T-bar. Apply in direction of wood grain in a pulling motion with smooth, level strokes. -Rust-Oleum Product Support 14

A:  We're happy to clear things up. Rust-Oleum Parks Pro Finisher Water-Base Polyurethane is a durable clear finish designed for coating and protecting hardwood floors and other interior wood surfaces. This will not adhere properly to a cork floor. -Rust-Oleum Product Support 14

A:  Happy to help Andrew. Rust-Oleum Parks Pro Finisher Water Based Polyurethane for Floors can be applied over an oil based floor polyurethane, provided it has fully cured and is a polyurethane for floors. Scuff sand the surface before applying Parks Pro Finisher, a minimum of 3 coats are required. - Rust-Oleum Product Support 6

A:  Great question, Nancy! Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors can be applied to previously finished wood floors, as long as a shellac or lacquer was used. The floor will need to be lightly sanded as well to ensure full adhesion. - Rust-Oleum Product Support 3

A:  Thanks for reaching out, Kyle. Life expectancy of Rust-Oleum Parks Pro Finisher Water Based Polyurethane For Floor varies depending on surface prep, application as well as wear and tear on the floor. With proper surface prep and applying a minimum 3 coats, the finish typically lasts for several years. - Rust-Oleum Product Support 6

A:  Happy to help, Glendon! Rust-Oleum Parks Pro Finisher Water-Based Polyurethane for Floors can be cleaned with most floor cleaners once fully cured. We recommend avoiding harsh cleaning methods, like aggressive scrubbing or hard chemicals like bleach. With any new cleaning product, a test application is recommended first to ensure favorable results. - Rust-Oleum Product Support 3

A:  Thanks for reaching out, Arbie. Rust-Oleum Parks Pro Finisher Water Based Polyurethane For Floors is designed for application to wood floors, it cannot be applied to laminate flooring. - Rust-Oleum Product Support 6