Questions and Answers for Simpson Strong-Tie Titen HD 1/2 in. x 3 in. Zinc-Plated Heavy-Duty Screw Anchor (25-Pack)

A:  Hello Eddie, this is McKenzie with Simpson Strong-Tie. For the THD75100H, the washer diameter is 1.6". The hex head is between 1.1" and 1.3" wide and is 0.74" ling from under the washer to tip of the hex head.

A:  ​Hi ThriftyGuy, thank you for your message. This is Ricardo with Simpson Strong-Tie. Minimum embed depth which I would argue is more critical for post-installed anchors can be found in the TEB bulletin link below for Titen HD. Maximum embed depth is typically determined by the length of anchor one calls out minus the thickness of fixture installer is anchoring. https://ssttoolbox.widen.net/view/pdf/uw7dovroi1/TEB-A-THD22_R1.pdf?t.download=true&u=cjmyin If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.

A:  Hello J123, I am Colin from Simpson Strong-Tie. The Zinc Plated THD37600H is not intended for contact with many types of pressure treated lumber chemicals. However, I do not know if the Zinc Plated or the Mechanically Galvanized THD37600HMG Screw Anchor is suitable for your application. We do have a technical bulletin on strongtie.com that provides prescriptive anchorage solutions for connecting a 2x pressure treated mud sill to a concrete foundation. Enter the code T-A-SILPLANCH21 in the Search strong-tie field at the top of our home page for more information. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. We look forward to hearing from you.​​

A:  Hi Alfonso, This is Ricardo with Simpson Strong-Tie. We do offer both sizes you callout for the Titen HD and bearing plate dimensions. Please see links below to each product homepage with product specs and model numbers. THD75700H https://www.strongtie.com/mechanicalanchors_mechanicalanchoringproducts/thd_anchor/p/titen-hd BPS 3/4-3 https://www.strongtie.com/bearingplates_anchorbolts/bps_plate/p/bps Our Customer Service team is available to talk with you directly and take you through a step-by-step solution. Please call us at 800-999-5099. We look forward to hearing from you.​

A:  Hi Call, this is Colin from Simpson Strong-Tie. You'll need to use a standard sized 5/8" diameter ANSI tolerance drill bit. If you need more information or have additional questions, please contact the Simpson Strong-Tie Customer Service team at 800-999-5099. Thank you.

A:  You will need a 5/8" hole for this bolt. The hole should be the same as the nominal size of the bolt.

A:  Hi, this is Ricardo with Simpson Strong-Tie. The Titen HD can be used for high wind design. Please reference our High Wind design guide for some additional information. https://ssttoolbox.widen.net/view/pdf/qdm2sqxtml/F-C-HWG20.pdf?t.download=true&u=cjmyin If you still need assistance, please call our Customer Service team at 800-999-5099.

A:  Hello Sman, this is Ricardo with the Simpson Strong-Tie Company. In order to be sure the threads of the THD anchor pass through the wood, we would recommend you pre-drill the wood at 5/8" using a wood bit. For the concrete, using a masonry bit, it would be pre-drilled 1/2", since the threads are designed to cut into the concrete as the anchor is turning. Thank you for choosing our products. Have a great day.

A:  ​Hi Chris, thank you for your message. We want to make sure we address your question regarding the capacity of Titen HD® Heavy-Duty Screw Anchor. Please contact the Simpson Strong-Tie Customer Service team at 800-999-5099 so that we can assist you. We look forward to hearing from you.​​ -Stacy

A:  Hi JoshEpp, this is Ricardo from Simpson Strong-Tie. The Titen HD mechanical screw anchors are not intended to be used with epoxy. They get their mechanical bond by the teeth of the anchor cutting into the concrete. Please call our Our Customer Service team iif you need to talk through the installation instructions with the Titen HD. Please call us at 800-999-5099. We look forward to hearing from you.​

A:  Hi Geo, this is McKenzie from Simpson Strong-Tie. The tension values for the THD are dependent upon your application. All of the Design Information for the THD's can be found on our website (www.strongtie.com) by searching THD in the search engine at the top of the page. Once you get to our THD landing page scroll down to the Design Information and Load Tables. This information can also be found in our catalog (C-A-2021) Should you need additional information please reach out to our Customer Service team by calling 800-999-5099.​