Q:Im looking to install a lift on the wood ceiling of my garage. The weight of the lift is 25 lbs and the hard top it will lift up is about 70-ish (high end estimate) if I’m using a steel frame bar to fasten it to the ceiling. Will a couple of these fastene
by|Apr 19, 2024
1 Answer
Answer This Question
A: Hi there, thank you for your interest in our TEKS products. We need a few more details about your specific application as we want to ensure we are providing the best recommendation. Can you please reach out to our experts either by call or email? Please feel free to call us at (800)-222-6990 or email us at tech@paslode.com. There we will gather the necessary specs to recommend the product you will need.
by|Apr 19, 2024
Q:Would the tensile strength of these be OK to attach 2x6 lumber to 14 gauge square channel steel for a garage door frame? (metal garage)
by|Feb 2, 2024
1 Answer
Answer This Question
A: Hi John! The screw would be able to go through the wood and metal, however, we have a few questions about the garage frame. We want to make sure that screw would be the best for this job, please call us so we can give you the best recommendations: (877) 489-2726 or email us at CS@itwbrands.com.
by|Mar 1, 2024
Q:Can I hang kitchen cabinets on metal studs with these screws
by|Dec 6, 2023
1 Answer
Answer This Question
A: Hi! Thank you for reaching out, we need more information about the weight of the cabinets, the type of material and other details. But please reach out to our tech experts at (877) 489-2726 or email us at CS@itwbrands.com. That way we can make sure you get the right screws!
by|Dec 12, 2023
Q:Can I use these to hang kitchen cabinets on metal studs
by|Dec 6, 2023
1 Answer
Answer This Question
A: Hi! Thank you for reaching out, we need more information about the weight of the cabinets, the type of material and other details. But please reach out to our tech experts at (877) 489-2726 or email us at CS@itwbrands.com. That way we can make sure you get the right screws!
by|Dec 12, 2023
Q:Would these screws be good for fastening wood furring strips to aluminum studs?
by|Nov 13, 2023
1 Answer
Answer This Question
A: Hi there, our Wood-to-Metal screws are meant to provide a secure hold for wood to metal applications. However, before we can provide a yes for this application we need a few more details about the furring strips and aluminum studs. Please feel free to call us at (877) 489-2726 or email us at CS@itwbrands.com so we can give you the right size and screw recommendation.
by|Jan 9, 2024
Q:What is recommended to secure metal trac to I Beams
by|Oct 16, 2023
1 Answer
Answer This Question
A: Hi there, thank you for your interest in our wood-to-metal screws. We need a few more details about your specific application as we want to ensure we are providing the best recommendation. Can you please reach our to our experts either by call or email? Please feel free to call us at (877) 489-2726 or email us at CS@itwbrands.com. There we will gather the necessary specs to recommend the product you will need.
by|Apr 23, 2024
Q:can these be used to attach 5/8" plywood to 3/16 metal beams
by|Sep 17, 2023
1 Answer
Answer This Question
A: Hi there, ITW recommends usage in steels up to 1/4 in. Usage in steel thicknesses greater than 1/4 in. may be possible, but ITW does not have data to corroborate at this time. Please feel free to call us at (877)489-2726 or email us at CS@itwbrands.com, if you have any questions.
by|Jan 10, 2024
Q:Can you this to attach and hang something on the wall into metal stud?
by|May 18, 2023
1 Answer
Answer This Question
A: Hi there, can you please provide more information on what type of item you would be hanging?