Questions and Answers for Water Worker 86 gal. Pressurized Well Tank

A:  Did not see one in the picture. Mine was the tank only.

A:  Yes, it can and works fine for a smaller home, would recommend a larger tank for less pump cycles if you can afford it!

A:  Pre-charged at 38psi. Set it to 2psi below your pressure switch cut in. My pressure switch is a 40/60 so I didn't need to adjust the tank pressure at all.

A:  Yes! The tank is a 1" fitting.

A:  I'm not completely sure if the 86 gal tank has an 1 1/4" inlet on it or not, but if it does, you can still use it, you just have to buy an 1 1/4"x1" reducer and an 1 1/4" male adapter with pipe to make it work.

A:  The pressure tank has standard 1 1/4" female pipe fitting on the bottom. Use whatever reducer you need to attach to your existing manifold system.

A:  Of course as long as you use adaptors or reducers if needed

A:  Not sure of the weight just google the model number and  you should have all the specs 

A:  The box it comes in says Made in USA. I believe these are rebranded Amtrol tanks.