Customer Reviews for American Standard Cadet 3 10 in Rough Two-Piece 1.28 GPF Single Flush Elongated Chair Height Toilet with Slow-Close Seat in White

This is a complete package with all the necessary installation nuts, bolts and even the tool to turn the nuts. A wax ring is included. This is a great toilet.

Lots of upgrades I didn’t see on the box. Self closing seat, powerful flush, extra thick wax and very easy install (done in about 15minutes)

There’s not a lot of options for 10” rough-ins at Home Depot but I like this toilet a lot. The installation was easy, every part except the supply line is included. The seat is a slow-close and the zip-nuts used for the seat make it easy to install and remove the seat. For some reason I really like the looks of the tank lid. The performance seems really good after a week of use. It’s MaP rating is the highest possible, 1000, which means it can potentially flush 2.2 pounds of poo. Hopefully the Ever-Clean surface works.

Very easy for a DIY installation. It was made as described in the listing. Am happy to have found a quality toilet with the 10 inch spacing wall to bolts. It works well.

Worked well, powerful flush. If you need a 10 inch rough you can't go wrong

I've installed my share of toilets over the years and putting this one was a breeze. I needed the model designed for a 10" R.O., because the room is a small, compact half-bath. A 12" R.O. model would not have fit; this unit fit in the space available with room to spare. I particularly like how tank ultimately comes to rest on hard, porcelain "shoulders" that are an integral part of the bowl. Very sturdy; very stable. (The vanity that appears in the image is from Glacier Bay and also came from Home Depot.)

This is a kit. It has everything you need with the exception of the connector which runs from the water source to the toilet. That you have to buy if you do not have it. You might not have it especially if you are transitioning to an ADA compliant toilet which is higher. It works just great. Pay attention to the rough. It is very important to get the right rough: http://www.professortoilet.com/2009/10/21/how-to-measure-a-toilet-rough-in/

I've been doing plumbing around the house for 35 years and have installed many toilets before. This unit is probably the worst quality I've see yet. 1) the fill line to the tank is so close to the base so you can only screw the line on when the tank is off the base. 2) the main rubber seal is too large and will not let the tank rest on the base 3) tank leaks, not sure where it's coming from but I hear a drip and I have a wet floor. If there were another 10" rough in unit, I would take this back. Very poorly designed.

This American Standard cadet 3 is just the right height. Easy to install and was a perfect fit in our guest bathroom. The single flush eliminates the need to double-flush. This Meets EPA WaterSense criteria use 1.28 gallons per flush very efficient money saver. The elongated design is extremely comfortable the bowel is easy to keep clean with very little effort. You can tell right away that this is a high quality unit at a very affordable price.

This toilet package contains EVERYTHING needed to install the toilet and seat. Literally, once I removed the old toilet, even the tools needed were included with the package to install everything. Everything was well packaged in cardboard, a definite plus for me, since it is all recyclable. No foam, and only a couple small plastic bags for parts and protection. The particular kit is that I got is designed for situations where the floor flange is closer to the wall than most modern designs. It is specifically designed for 10” from the wall rather than the standard 12”. Some older houses as well as some with tighter plumbing restrictions will need this close-quarters option, which will save from a very expensive re-plumbing problem. I would especially recommend the taller/ADA height toilet unless you have small children that would be using this. Americans have been getting taller in the past several generations, so this makes sense. The installation went very fast. Instructions were clear, diagrams were well done. The included tightening tool works well. After turning on the water, checking for leaks and finding none, I found that the flush is fast and the fill is fast, both benefits of low-flow technology in addition to saving water. The flush seems to clean the bowl well, and compared with my old 5 gallon model (which usually needed double flushing) I should be saving around 60,000 gallons of water per year for 2 people. Pretty impressive. The flush mechanism is a common Fluidmaster brand, so any needed parts should be easy to find. The instructions said to adjust water level in the tank to indicated mark, but I could find no such mark. The level seemed to be about 1/4” too high (very close to the overflow tube), but that was a quick finger adjustment screw and took about 5 seconds. Overall, this seems to be a quality toilet which should last for many years.

I would recommend Cadet single flush elongated toilet. The product was packaged great, no cracks or problems with the toilet. All assembly items are included, even the wax ring. I did have to purchase a new water supply line, because this new toilet is taller then my old one but that was an easy fix. Make sure and measure your water supply line and make sure that it is the one that fits this size toilet. Slow close lid is always a nice added feture. Powerfull rinse cycle that really helps to clean the bowl. Elongated seat is comfortable. 1.28 gallons per flush is plenty of power needed. I am happy with this toilet and the easy install to put it in.

Functions as described with no negative aspects.

Works well. Have to hold the handle down axsecond or two. A little loud

This toilet was delivered by Home Depot in the sealed brand new box. When I opened the box the toilet had a steam residue from factory. It was a white porcelain drop of cement stuck in the bottom of the interior. Tried to remove it but it would not come off. Return the toilet.

Not a complex installation. Everything you need is included, except caulk to seal toilet the floor. Happily satisfied with the outcome.

Provides a royal flush! Very happy with this toilet as a replacement for an old Kohler toilet that even after plumber service couldn't handle just toilet paper. Was afraid it was low water pressure in the area, but this model is a definite upgrade!

This toilet was easy to assemble & install

It doesn’t flush long enough to clean the bowl. Have to hold handle down until all water and waste is gone. And doesn’t get enough water around sides to clean the bowl either.

Great product and easy to install.

Installed less than a month. Works as advertised