Customer Reviews for DIABLO 6 in. 8 TPI Steel Demon Carbide Reciprocating Saw Blade for Thick Metal Cutting

very good tool.

I bought this to go with the sawsall, and I am glad I did, cuts cast iron pipe with ease. $11, worth every penny! GOOD MONEY!

Bought 2 of these today to find a way to cut through some 3 inch channel in a spark sensitive area. Made 6 cuts and the blade is still in awesome condition. The blades cut through the material like it wasn't even there. Definitely worth the extra few bucks you spend on them.

We used it to cut a hardened solid steel 1.2 inch diameter front wheel Sienna drive shaft using a Porter Cable TigerSaw. Blade is rated to 1/2 inch but could not find a higher rating blade. A regular blade would not touch it. It took two of us and the ground to hold the saw. The sparks were yellow! After half the job, the first blade was done. We used less pressure and the second blade was still good when we were done. Took over 40 minutes including rest breaks and repositioning and figuring how to do it better. Better would be a cutting torch but this was on the driveway under the car. Forgot to try using cutting oil. Great blade. Got the impossible done.

It cut through cast-iron very easily

Had old galvanized pipes... cut within seconds

Cut steel that other blades would not.

Awesome blade

wow cut right through the pipe in no time flat! much faster than the hacksaw blades I've used before

The only blades I ever buy for my reciprocating saw. This blade cuts through black iron like a hot knife through butter. Put this blade on a cheap reciprocating saw and it becomes a decent saw. I just wish they made oscillating saw blades, then I’d be in heaven.

One of the best blades I use on the plumbing field. Never lets me down when I cut cast iron pipe on Multiple cut with one blade . Wouldn’t cut with any other blade they have bought me with one blade that I can use over an over for just about any cut pvc,copper,steel, even cast iron one blade does it all

I cut up the frame of camper and could not believe how long this blade lasted and it's still not shot. worth every cent.

Cuts fencing pipes,with ease. Stays stiff and straight with proper use. Cuts small branches too.

cuts like butter

I cut 2 inch square tubular trailer hitch without a problem, no sparks as with a side grinder.

This blade cut a steel bolt like butter.

The Diablo blade is the truth. It cuts cast iron pipes like cutting butter with a knife.

These blades work great and continue to make many more cuts in steel then any other top brand blades I’ve used.

The blade is sturdy and long-lasting, but not terribly fast at cutting steel pipe. It seemed dull when I first used it and still seems just as sharp (or dull).

It worked very well on the steel plate and channel that I tried them on. I am getting ready to try some thicker pieces this week.

Worked very good when having to cut actual metal

The only blades I buy now

Best brand out there.

these blades are great

use in cutting 8" thick blue pvc water duct line

Works as expected

Great for cutting 4X4’s in tight spaces.

Seems to work great so far. Only had to cut one hardened sleeve out of a control arm but it did the job better then the other blades ive used.

Used to cut 1/2" re-bar and metal post that was used to keep some bushes/trees in place. It cut those OK but did that a bit of time to get it almost halfway so I could just bend the post and break it.

I used this with a PC Tiger Saw (my battery powered reciprocating saws were not up to the task at all) to cut out the hardened grade 8 steel bolts on the rear suspension links of my old Pathfinder. For some of the bolts I needed to use the 12 inch version of this blade. There were only 8 bolts but the bi-metal blades could not compare to the way these blades cut. Expensive but well worth it for the savings in time and aggravation.