Customer Reviews for DIABLO 6 in. 8 TPI Steel Demon Carbide Reciprocating Saw Blade for Thick Metal Cutting

Worked as expected

Rating provided by a verified purchaser

Great Blade! I was able to cut down a steel structure with one blade.

Diablo is hands down the best cast iron cutting blade on the market!

Rating provided by a verified purchaser

Does an amazing job.

Made short work of the rebar I was cutting.

Work perfect for cutting a upper control arm on my car. Diablo blade cut it under 5 mins,

I was replacing a faucet and the pipes underneath. I spent hours trying the get all of the pipe pierces off. The pipes were old and were a really hard metal. I finally gave up and bought this blade and cut the pipes off. This blade was amazing. Definitely worth the price!! I highly recommend it.

Rating provided by a verified purchaser

Sharp and last longer compared with other brand

I used it to cut some wire after failing to cut it with a normal hacksaw. Too close quarters for a side grinder I was skeptical but it worked fine and I finished my project in short order. A little pricey but saved me time and aggravation.

Had to cut up steel bed rails to fit in my garbage can. It went through them like a hot knife through butter. Great sawzall blade!

Haven’t used yet but looks good

Rating provided by a verified purchaser

This is now a staple among my saw blades. Did a great job on exhaust pipes!

If your thinking about cutting hardened steel with these don’t waste your time they won’t last through one cut. To be fair I didn’t try cutting softer steel pipe which is what these are designed for so they may be fine for that unfortunately the 2 I bought didn’t last long enough to try other metals

Stays sharp, cuts slower than I seen on the videos. seems like its gonna last about five times the normal.

The blade wore out on the first piece of steel ( 3/16 inch thick ) I cut. One and done.

Amazing blade! Was able to make multiple cuts in steel plumbing, an Evey cut felt like a fresh blade.

Rating provided by a verified purchaser

Easily cut through hard deck screws.

I bought this today and cut one steel post... The carbide is already chipping off the blade. Mobile site refuses to let me upload a picture.

Really cuts through metal as advertised

Went through a 50+ year old 2inch galvanized drain pipe like it was butter.

Tried to cut 1/2 inch aluminum with it. Did not work.

Used to cut a front half shaft on a Lexus 350 ES. Was told it’s like cutting a pipe. If felt like it. When the cut is complete, I realized it had a small bore about 1/8 inch at the center, the rest was solid metal, and yet this blade cut through it with no problems. Swiss made.

I had to cut my cam bolts off both lower control arms and I first bought the Lenox Armor Lazer (Thick Metal 10 TPI) and spent an hour to cut through one of the eight bushings. It also took one and a half Lenox blades to do it. I gave up and went to Home Depot to get the Diablo blade. It cut through everything like butter. My son and I were amazed after we did the first cut in about a minute...especially after the last cut with the Lenox blade took an hour! After doing the other seven cuts, this blade will still cut more. There is absolutely no comparison between these diablo blades and anything else on the shelf. If you keep your project lubed and cooled with WD-40, you'll have zero issues. Unfortunately, they didn't have single blades so I had to buy the three pack.

This cut right through stainless very impressive!

Did the job very efficiently