Customer Reviews for Fuji Spray Semi-PRO 2 M-Model HVLP Paint Sprayer Gun with 400cc Gravity Feed Cup and 1.3 mm Air Cap Set HVLP Paint Sprayer System

Very easy set up. Cleans quickly. I did 3 light coats on a piece of furniture and it looks great. I'm very pleased with this purchase and would recommend it.

Good sprayer,

Great product. I did a fair amount of research prior to puchase. I was somewhat concerned that it wouldn't perform well with thicker paints, but it worked great with properly thinned latex paints. Several reviews said that the whip hose would help with mobility, but I found the stock hose quite workable.

Spray system works very well. Spray pattern is easily adjustable. Gun is easy to clean. I might purchase a larger spray cap in the future to allow spraying thicker materials. Very satisfied with this system and can recommend it.

Rating provided by a verified purchaser

Couldn’t be happier with the purchase, great product, relatively easy to use.

Meets every expectations. I am not experienced with spraying finishing materials. After a little use, I am getting familiar with spraying and able to produce good results. Should have purchased much sooner. This model is well suited for my occasional use. However, if could do a do-over, I would get the larger suction cup gun. The capacity of the gravity gun is small.

Only have used once to date. Well built, very solid components. Sprayer is well balanced and does not fatigue you arm. Definitely recommend the 5’ flex hose

Couldn’t be happier with this setup, used to spray all kitchen cabinets in my house. Can’t wait to use on more projects in the future.

Rating provided by a verified purchaser

Works as advertised. Once I got viscosity correct, sprayed latex evenly and consistantly. Also, sprayed an alkyd water base urethane. Awesome results!

This is my first HVLP spray gun that I'm using to finish custom built furniture. The unit is very easy to use, the controls are easy to understand and adjust, and the painted spray finish is excellent. Easy to clean as well. Very satisfied. Price is excellent.

Great spray system for a DIYer. Great finish, a little difficult to keep clean after use. Overall very pleased with the system.

This is my first HVLP spray gun that I'm using to finish custom built furniture. The unit is very easy to use, the controls are easy to understand and adjust, and the painted spray finish is excellent. A little loud as described by others. Easy to clean as well. Very satisfied.

New to using a paint gun but very impressed. Used it on my most recent project and it worked seamlessly. Easy to use and easy to cleanup. Had it for a couple of weeks but definitely exceeds my expectations.

The turbine worked as expected but the gun has issues. First the cup is way too small. The gravity feed gun supplied is actually a bastardized siphon gun with a "U" shaped tube that supports the tiny cup on one side. That's right the gun is not balanced, much of the weight is to one side. One needs to compensate for this offset that changes as paint us used.Fortunately I already had a one quart suction cup that I can modify to make this actually work. Also this unit as sold can only be used to spray paint vertical surfaces. When you tilt the gun to paint a horizontal surface like the roof of a car, the material doesn't flow out of gun properly. Hopefully this system will work better after I modify the gun.

An excellent tool for a DIY'r. You're going to need a bit of practice getting the proper viscosity/nozzle combination for the material you plan on spraying but with a little trial and error you should be moving towards the Pro level in no time. As others have mentioned, the turbine is LOUD, required to be on the floor with the on/off switch is on the bottom. I ordered a remote switch which alleviates the switch location problem but I haven't found a solution for the noise issue. Another issues I had which is strictly a personal experience issue was choosing Gravity Suction over Gravity feed gun. I had first ordered the suction feed unit and returned it for the gravity feed because it felt more comfortable to maneuver. I'm use to using Sata Jet and Binks gravity feed automotive HVLP paint guns that probably had a lot to do with it so, if you get the opportunity, try each one and see which suits you. Whichever one you choose, Get the extension hose! Neither gun is comfortable without it.....

Disassembly tool out of spec, too small for all of the nuts/bolts. Tool to clean gun does not work well, had to buy additional tools for cleaning. Gun works pretty well, but need adjusting every few minutes. Does not hold well at one paint flow rate.

Only used once for interior latex and so far so good. Had to thin about 20% and came out pretty good using standard air cap. A larger air cap is recommended for latex so I would like to get that and compare. Unit seems well built.

This is a great system. it puts out a consistent pattern leaving a smooth finish. works well with different types of paints and coatings