Customer Reviews for Gutter Guard by Gutterglove 4 ft. L x 6 in. W Stainless Steel Micro-Mesh Gutter Guard (80 ft. Kit)

I installed about 85 feet of these and couldn't be happier. They were much easier to install than I anticipated. Being able to bend the stainless steel mesh as needed helps tremendously. The included screws and magnetic driver bit are a great plus. I didn't use the included double-back tape. The mesh is fine enough to keep out granules from shingles, but allows water to pass right through. I looked at a lot of gutter cover options - there are a bunch out there - and these looked like the best to me. I'm very happy with them. The only concern I have since I live in the northeast is how these will interact with snow and ice. Time will tell. The manufacturer recommends heat tapes for the roof in areas like mine, but I haven't decided on that yet.

Gutter Guard, so far so good. Easy to install, and keeps the debris out!

Bought 80’ pack. Hardest part was climbing up and down ladder during 90 degree heat. Installed as per instructions, no issues. Took time to miter corners and overlapped mesh. I’m 69 years old and still continue to do own yard work. Gutter guard installation was no challenge, in my humble opinion ☺️

Best gutter guards that I’ve ever had. I highly recommend this product.

Very good quality, easy to install. Though a bit expensive, but worth the money for long term, way better than plastic covers, which easy to bend and the holes are kind of big and easy to get moss, then even grass can grow from it. Just note that, better to where working gloves when install, in case the edge of the metal/mesh may scratch your hands.

I purchased enough of these gutter guards to do the back of my house. I thought I should try them out before purchasing enough for the entire house. Well I'm a 63 year old women and I had no problems installing these myself. I was dreading this project but I couldn't put it off any more. Every time it rained water poured over the gutters. I would clean them out but they quickly filled up with pine needles. So far these gutter guards are great! I can't believe I waited so long to tackle this project. It was so easy. Glad I bought these!

I had eaves rot out thanks to clogged gutters high up on a 2 story house, after having roofers replace the eave they suggested a gutter guard install would help prevent this issue going forward. Based on their quote I did some research and found these gutter guards that are affordable and very easy to install with just a drill and a pair of snips. Now I have more confidence my gutters will stay clog free, I did go ahead and get the brush that attaches to a broom handle to quickly brush off the guards when leaves pile up on them which likely won't be a problem until fall when all the trees shed their leaves. The only thing I can say negatively about these is getting the mesh of 2 panels to perfectly close gaps is a bit tedious.

I was hesitant to try this myself but I read reviews and watch a bunch of youtube videos comparing different types of gutter protection. After a few recommendations by independent contractors helped me make the ultimate decision to buy the GutterGuard by Gutterglove. This is a well made rugged product made from high quality stainless steel mesh and not plastic bug screen that will rot over time from the UV rays from sunlight or the extreme temperatures here in New England. I could not believe how easy the instructions are and I was able to put these up myself. Currently I am installing a pergola over my patio and one side comes right up to my gutter, which would make it difficult to clean gutters in the future. I thoroughly cleaned the gutter and installed these in a few hours. As soon as I finished it started to rain. They worked perfectly!

Fairly easy to install off a step ladder. More difficult off an extension ladder supported off gutter. Recommend having a surface grinder with diamond cutoff blade. Recommend predrilling the aluminum frame rather than depend on self tapping screws. Recommend sheet metal screws #8, 1/2” as the self tapping screws do not pull in as well.

I purchased 80' to cover the gutters on the front of my residence; and I am very pleased with the ease of installation and quality of the materials, so much so that I ordered another 124' to handle the rest of my gutters. Before acquiring GutterGuard, I obtained quotes from 2 other top brands. The quotes were more than 10 times what I spent on GutterGuard. It took me less than 3 hours to install the first 80' and I anticipate the remaining install will go even quicker.

Easy to put together. Sometimes you have to work to lift some of the shingles up to put the lip under. The mesh is very fine, so expect shingle elements (the grains) to fall onto your deck (I guess it's better than them accumulating in your gutters).

I installed these last year and finished up this year. They are pricey, but well worth it.

These gutter guards are, great quality and built well. I was surprised with the ease of installation. I am looking forward to the next rainfall now. No more pine needle clogged gutters.

Super easy installation , and they are working great

Quality product. I had to use two different methods to install these. Instructions that come with these explains installation real well and easy to follow. The old part of the house the gutters sit lower and I had to bend the rear side to mount them. The new section of the house I was able to slide the rear under the shingles and attach the front edge. The front edge has double sided sticky tape but they also include self tapping screws in the box. I'm very satisfied with the results.

Great Product!!! Easy to use. My gutters look great!!!!

These are definitely the best gutter guards I have purchased. Let’s hope they’re easy to clean!

I used the screws to install them over the tape. With the screws they hold well. It was somewhat of a pain to get them to slide under the singles, but that was due to my roof and not the product. After about a week I can already see a lot of stuff on top of the guard that would have ended up in my gutter. I’m glad this is the last time I’ll have to clean out my gutters.

Easy to cut and install. Has not been installed long enough to know how they hold up over time but expect them to be pretty good.

I just installed the first four sections and am very pleased. Using the self-tapping screws is awesome, it secures the product very well. I replaced snap-on plastic screens that were damaged in a hail storm and found they also lost their shape and half were coming apart from the gutter. I look forward to our first rain this evening!

Very easy to work with once you know which type of installation you need to do which gutter guard’s instructions help you figure out. Only thing I had trouble with was capping the ends.

These gutter guards are great. Same quality as the ones you would have installed by a professional. But at a fraction of the cost. Easy to install with the correct ladder and stabilizer. Highly recommended.

After reviewing a section of gutter I had installed on a section of my detached garage by a contracted company and paid way too much for and couldn't afford to have them complete my house, I finally decided to try and find an adequate solution to complete my house. The gutter guard by Gutterglove was the perfect long term solution. The engineering is almost identical to the other guys at literally a fraction of the cost. Install was easy. I just installed them so time will be the test but I think it'll all be good. I'm attaching pics. The new shiny pis is the Gutter Guard. The other is the competition. Not much difference except for the cost.

Installed these on 65 year old 5 inch gutters and they are working great. I liked the quality and ease of installation. I installed them myself. As I was cleaning gutters this year I decided if I'm going to go up and down ladder to clean gutters, I might as well install the Gutter Guard and eliminate need to clean gutters again. I wish i would have done it 30 years ago although I realize this good of quality was not available at that time. I used the included self tapping screws instead of the included tape just in case I needed to remove at later time for some reason.

Easy to install, VERY STRONG and solid construction, had a major storm and water made it through - debris did not. I like the option to use the included 3M tape to hold them down OR the self-tapping screws (also included WITH the magnetic bit for the drill). Time will tell how good of a job these do, but I would recommend this product!

I live in the Seattle area and we have several kinds of trees including cedar and Douglasfir as well as large maple so I feel like if they can work here they’ll work anywhere. I have attached a picture of my gutters that I installed yesterday right before a big rainfall and you can already see them at work with several granules and needles

I live in NW Montana. The guards are working quite well to keep out leaves and pine needles. The guards were tricky to install and required some bending. But with some hired help we managed to install two boxes worth in two half days. I would buy them again.

We priced professional instillation of a known brand. Over $1500 for our house. We DIY’d this for less than $300!!! Woo hoo!!

Great instructions for various types of roofs. Installed 110’ in about 5 hours. I used the included screws and drill bit to install. I used tin snips to cut. Looks like a quality product.

Bought this to replace older product which was plastic. This is so much better quality, better design, and easier installation that I wish I had gone with these in the first place. I had almost 230 feet of gutters, and got it all installed in a day. Adhesive strip works great in 99% of cases, but where it didn't, the self-tapping screws worked awesome and were a piece of cake. Really great product.