Customer Reviews for Husky Deburring Tool

I needed this deburring tool to ensure that some ABS pipe I was installing did not have any burrs and sealed up properly. This tool takes a little getting used to. As a novice, I have never used one of these before but I felt like this was a tool I would need. The blade can freely rotate so finding the correct angle and pressure is key to getting the tool to debur the pipe. It also comes with an extra blade which can be held in the other end of the tool. Overall, this is a handy tool to have if you have cut pipe that needs to be deburred.

This Husky deburring is a good tool. It feels good in the hand and works just like Youtubers say. I bought it to scrape edges on my 3D prints (PLA) and I need more practice - I am used to a normal knife blade though it works well on the steel and aluminum scraps I had laying around. ...... I would recommend this tool if you think it is what you need.

Broke in a couple weeks.

It is a rare opportunity to have someone like Richard, I’ve had several instances where Richard helped me find what I wanted in the store, amazing guy, reflects the value of helping a customer. Home Depot should hire and train more folks like Richard.

Works as advertised. It spun good, made the pipe burr free, and added a little chamfer for joints.

Broke on first use. Tried to de-bar 3/16 brake line.

Works as well as the more expensive Noga for deburring

I bought this to use on 3D printed parts, not pipe. It works well to remove flashing, brims, elephant feet, etc. One thing to know is the cutter is held in place by some kind of detent that rides in a groove on the cutter shaft. It is possible to under-insert or over-insert the cutter which will not allow it to swivel easily (mine came that way). Also, the replacement cutters are out of stock, but the instruction card says that this will accept standard cutters.

Cheap easy to use. Come with extra blades.

Did the job. Was expecting a little more longevity out of the blade

Worked exactly as expected.

Worked well and as promised on both copper and pex to remove the burr inside the tubing. A nice plus is that there is a replacement blade, however there are no instructions on the packaging as to how to change the blade.

This is a great reamer with a huge benefit to the blade storage, but it just simply doesn't last long enough to stick around if you're a pro. The part of the reamer that holds the blades is prone to breaking after a while if you run enough pipe. I keep one of my broken ones in my tool bag just to store extra blades in.

I used to use the little nubbie thing on the old fashioned pipe cutter but that never seemed to make it nice and smooth. (I'm a weekend warrior with home repairs!) I got this for 3/4" coper pipe. It is super easy to use and works better than I expected!

So far working on copper and pvc great I do recommend it.

The tool met my expectations. The key is not to apply too much pressure. Let the tool do the work.