Customer Reviews for Milwaukee 3/8 in. x 18 in. Bellhanger Bit

used this at work every day still sharp as the day we opened it.

This is a really nice bit for drilling deep holes or running wire. Comes in a great package that can be used for storage of the bit during its lifetime. Recommend this product.

Nice bit set, but it's hard to get the bits out of the holder. Nice to have doubles of the smaller sizes.

I used once and it broke i need to take to the store to return i do still have the receipt ,i hope the store wont make a big deal about returning this product

Worked great for drilling holes through floors. I especially like the hole near the tip to tie a wire to feed it back up through the hole. I my case it was phone line.

Poor metal quality used in this product. Drill bit did not bold well against red oak.

Biggest benefit is the length. Quite frankly, not very sharp and it takes a long time to get through any kind of lumber. I hit a 2x4 and it was not easily drilled through.

I needed to pull 1/4" tubing for a Reverse Osmosis installation through walls and floors. I did not have a drill bit long enough so I purchased the bit. It worked perfectly, bored easily through flooring, dry wall and wood. I drilled the first hole through the floor into the crawl space and left it all the way in the hole. So I grabbed a piece of 14GA copper ground wire, my tubing, some black tape and head under the house. What to my surprise? The hole in the drill to attach the pull wire is smaller than 14GA!? I had to crawl from under the house and try to find smaller wire. I am not impressed on this design at all. There is no reason that the hole could not be larger to use a standard wire size.

The drill cut easily through a large thickness of wood and allowed me to leave just a small pilot hole. It enabled me to make sure where I needed to drill a larger hole was the right spot.

The description said that the bit has a hole for attaching a pull string. The bit I received does not have a hole. That is an important feature for me

drill bit does exactly what it should. great for the price and does the job

Got the job done. Just the right size for running coax cable with connectors on. Holds a cutting edge well!!!! Wish I would have bought it sooner

The bit works well and we are pleased with are pleased with it!

I used this bit to drill holes for rebar in a raised beds I built for a vegetable garden. It worked very well going through cedar posts with a cordless 18v drill. I have no doubt I will use this product for other projects.

This 18 inch long drill bit allowed me to tie railroad ties together with threaded rods. My landscape project could not have been completed without this bit. The bit cut through the RR ties with no difficulties at all.

The drill bit does exactly what it is designed to do. It cut through pressure treated 4x4s with ease.