Customer Reviews for RYOBI 7 in. 4.8 Amp Corded Wet Tile Saw with Stand

It worked. However the included blade was a joke . Can’t stress enough how bad the blade was. Spent extra 50.00 and saw performed well. Do yourself a favor. Buy a good blade use the one included for target practice

This is a great buy! The saw has a guard which keeps the water to a minimum and it is so great to have the stand. I would definitely buy it again!!

I recently bought the Ryobi 7”, 4.8 Amp tile saw and Stand, and have used it several days to cut marble for home installation. Here’s my assessment - it’s definitely NOT the equipment that a professional would want to work with. It lacks the table size and ability to make precision cuts on larger and longer sized material. So if you’re going to tile a floor, a complete bath or other large sized area you should go for a bigger more expensive tile saw. That said the 7” Ryobi offers a lot for an amazingly low price of $120. I used it to cut marble “pencil mould” to exact lengths needed for dressing up already installed marble. It was adequate for that and would work well for items not exceeding 10” square. It’s well designed and the motor is adequate for that sized material. I would buy it again for such a job.

Had a diy kitchen backsplash project and it has been great for that. The stand is an option but well worth it. The OEM blade wore out quick and had to replace about half way through with one from harbor freight.

It works as well as I expected. The only thing I would like to see improved is the drain plug needs to twist or snap into place for a tighter fit. It pops out on its own to easliy.

Worked well for the small amount of porcelain tile and natural travertine I had to cut. Original blade badly chipped the porcelain. Bought a better blade to solve the problem.

Love this for small jobs. Works great, has nice stand as well. For sure much better quality cuts with better blade purchased separately. Great value.

Saw was easy to use. I did replace the blade with a higher end one because of some other reviews. This saw cut my porcelain tile with ease afterward! Even the 24” rip cuts and it is only spec’ed for 20”.

Saw works good for a less expensive tile saw. Had to replace blade. One that came with saw chipped the stone tiles. New blade is great - does not chip & get much smoother edge. However, metal split guard behind the blade is wider than the new blade, so have to use saw without the guard & splash cover. The stand works great. Sturdier than I thought it would be. Overall good saw, but you will need to buy better quality blade & be willing to use saw without the splash guard.

My first time cutting tile of any kind and found it to be very easy to use and to take with me. For the money, I think it was fantastic!

Easy to set up. Easy to use Did good job on cutting face brick for our backsplash

This was easy to assemble. Make sure you put the black leg brackets/Stops in correctly. The directions are not quite correct. Plus! You must have the leg extensions in when you bolt the legs together. Now, as far as all the complaints about noise and vibrations here we go. ( they had no clue. Probably high) 1) There is a 5/8 spindle on the shaft that holds the blade. It is an EXACT fit. If you don't have the blade on that it will wobble like crazy. 2)the motor is not loud BUT..the pieces that hold the angle vibrate against the top surface. 3) put the crome spreader plate in after you install the blade. It's easier to align.

After reading the reviews the saw was everything I ecpected even the bad blade that comes with it. It did arrive missing 2 feet which Ryobi took care of right away. It was as expected and did the job!

It does not like to cut 15x30 inch tiles to good

The saw blade is useful for making angled cuts for a small bathroom which otherwise are too difficult to freehand. The name and warranty were factors in choosing this wet saw over others with a lower price.

This tile saw worked great right out of the box. Had no issues with the supplied blade. Buying the saw and stand was almost $50 dollars cheaper than buying the saw alone.

I bought the saw to tile the upstairs bath. It was a very straight forward assembly. Love the legs, they are not attached so it makes it easy to fold away and store. For a wet saw I was pleasantly suprised at how little splashback there was on the operator. Other saws I have used required the need for some type of protection from the splash back. We are very pleased with the purchase.

Good price, instructions for the stand were not helpful. The saw has plenty of power for small jobs but the blade it comes with is not great.

I wish I could provide a photo of my slate roof but this saw worked out great to cut slate tiles down to size for edge pieces and places where a full shingle was not required. I can imagine this saw working great for any tile cutting and the stand it comes with is clutch.

you never know what to expect this was a pleasant surprise i dry cut several pavers and wet cut several feet of slate with the right blade it worked quite well i wish the depth of cut was bigger...it's actually less than my 4" circular saw...however using the fence straight line cuts are painless btw...use logic not the directions when assembling the stand