Q:Can the 110 CFM unit be installed on a wall 6 ft off the ground?
by|Dec 15, 2021
2 Answers
Answer This Question
A: Hi Jordan, Thank you for your question. The AERN110K can be installed in a wall, but only if mounted 8-ft. or more above the floor.
by|Dec 16, 2021
A: No, if installing on a vertical wall, it must be mounted 8 feet from the floor.
by|Mar 20, 2022
Q:Where can I get directions for wall installation?
by|Dec 1, 2021
2 Answers
Answer This Question
A: Hi Carol,
Thank you for your question on the AERN110K ventilation fan. The instructions will show for a ceiling mount installation. This product can be mounted in a wall if mounted 8 feet or more above the floor. The damper should point up. The installation will be basically the same for the wall mount except for the orientation of the housing. If you have further questions, please contact Technical Support directly at 888-336-6151.
by|Dec 1, 2021
A: Thank you for your recent inquiry with The Home Depot. Follow the link below for wall installation
http://www.homedepot.com/catalog/pdfImages/e4/e4de4300-ca89-43f1-a6bf-934511ba544e.pdf
We appreciate your business and look forward to serving you in the future.
by|Dec 1, 2021
Q:80CFM model says it can be installed in a wall but it doesn't seem to be included in the paperwork included. Can it be installed in a regular 2x4 wall (we need to replace the one already there.)
by|Nov 15, 2021
2 Answers
Answer This Question
A: Yes, I bought this fan. Very quiet
by|Feb 22, 2022
A: Hi AllieMae,
Thank you for your question on the model AERN80K ventilation fan. This model can be mounted in a ceiling up to 7/12 pitch. If installed in a wall, if must be mounted 8' or more above the floor.
by|Nov 15, 2021
Q:How fo i clean this fan?
by|Jun 12, 2021
2 Answers
Answer This Question
A: For quiet and efficient operation, long life, and attractive appearance on the AERN8780K, - lower or remove spring loaded grille and vacuum interior of unit with the dusting brush attachment. The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, replace the blower assembly (includes motor and impeller). Use some caution when lowering the grille, and be sure the power is OFF. Please contact our Customer Service Department at 1-888-336-3948 between 7:30 AM and 6:00 PM (CST) Monday-Friday for any additional assistance. Thank you.
by|Jun 14, 2021
A: you might have to use a vaccum or a air pistol gun. But you can also use a basic swiffer brush.
by|Jun 13, 2021
Q:Is this a constant running exhaust fan?
by|Apr 30, 2021
2 Answers
Answer This Question
A: The AERN80K is not a continuous operating exhaust fan. You may want to view the following models: AE50110DC, and QTXE1110150DC. These units offer different CFM settings, and these unit have continuous operation.
by|May 3, 2021
A: Ours is on a switch but we need to check all switches because it is so quiet
by|Jun 2, 2021
Q:WHAT ARE THE DIMENSIONS OF THE GLASS?
by|Mar 22, 2021
2 Answers
Answer This Question
A: The AERN110K doesn't use any glass. It doesn't have a light. The grille measures 12-1/4" x 12-1/4"
by|Dec 23, 2021
1 found this answer helpful
A: Initially not happy as the wiring harness was not suitable for the LED/ infrared light I had purchased prior. A quick call to the company and the correct wiring harness was sent to me free of charge. Works perfectly now, easy fix in switching out the harness even after installation. Very happy!
by|Nov 22, 2022
1 found this answer helpful
Q:What is the maximum ceiling thickness that this fan will accommodate? I have an older house with a thicker multiple layered ceiling, not just 1/2 inch drywall.
by|Feb 21, 2021
1 Answer
Answer This Question
A: The AERN110K should accommodate a thicker ceiling. We would encourage you to review the retrofit installation section. it will indicate that the installer must bend the ears flat against the housing to get the extra depth. Go to www.broan.com, type in the model number, scroll down to 'View" and then DOWNLOADS.
by|Feb 22, 2021
Q:Cab this fan be installed on a vaulted ceiling
by|Feb 4, 2021
2 Answers
Answer This Question
A: Sure
by|Mar 6, 2021
A: The AERN80K can be installed in a ceiling wtih up to a 7/12 pitch. The duct should be point upwards. Please contact our Customer Service Department at 1-888-336-3948 between 7:30 AM and 6:00 PM (CDT) Monday-Friday for any additional assistance.
by|Feb 4, 2021
Q:Does this have an integrated backflow preventer built in?
by|Jan 29, 2021
2 Answers
Answer This Question
A: Yes it has a built in spring loaded backflow preventer build in, to view watch this video it is on the left side of the product page. Mine has been installed close to two years now, working great.
https://www.homedepot.com/p/Broan-NuTone-Roomside-Series-80-CFM-Ceiling-Bathroom-Exhaust-Fan-with-CleanCover-ENERGY-STAR-AERN80K/307749054#overlay
by|Jan 31, 2021
A: This fan does have a duct adapter with a damper built in.
by|Nov 14, 2022
Q:When should the additional flange be used/what is its purpose?
by|Jan 26, 2021
1 Answer
Answer This Question
A: The AERN80K offers a pair of flanges that may be attached to housing if desired or required. The SnapFit Flange Kit provides a self-trimming finish to cover a rough cut. If you have any additional questions, , please contact our Broan-NuTone Technical Support Department at 1-888-336-6151 between 8:30 AM and 7:00 PM (EST) Monday-Friday.