A: Thank you for your question regarding the AERN80K ventilation fan. This fan is rated at 80 cfm's with 0.7 sones.
by|May 11, 2024
1 found this answer helpful
Q:What size opening is needed to fit this fan/light combo?
by|Apr 1, 2024
2 Answers
Answer This Question
A: Thank you for your question regarding the AERN110K ventilation fan unit. This model uses a housing size of 9-1/4" x 10" with a 4" duct size. The installation instructions state the following for a retrofit installation:
Enlarge ceiling opening (if necessary) to 9¾” parallel to joist) by 10½” (perpendicular to joist). (Some models have a cut-out template on side of carton or on grille packaging materials.)
Please contact our Product Support team with additional installation questions at 800-637-1453 via email from the Contact Us page on our website.
by|Apr 3, 2024
A: Thank you for your question regarding the AERN110K ventilation fan. This is a fan only unit without a light. The housing size is 9-1/4" x 10" with a 4" duct size. The installation instructions for existing installations state the following: Enlarge ceiling opening (if necessary) to 9¾” parallel to joist) by 10½” (perpendicular to joist). (Some models have a cut-out template on side of carton or on grille packaging materials.) The installation instructions can be downloaded here: https://www.broan-nutone.com/getmedia/ab8b76ae-a86d-4832-bd18-56418d33fd29/Installation_Guide_Roomside_Flex_Series_Fan-(1).pdf?ext=.pdf
by|Apr 3, 2024
Q:I installed th 80 crm model in a 38sf bathroom, have a reducer from 4 to 3, hard flex pupe w 1 90 deg turn.and it's not sucking air in, also very noisy. Also what is the rotational direction of the fan wheel. Is it the motor?
by|Feb 12, 2024
1 Answer
Answer This Question
A: Thank you for your question regarding the AERN80K ventilation fan. This model requires 4" ducting which should not be reduced to anything smaller. Reducing the duct size will reduce the performance, increase the sound, and can cause premature motor failure.
An elbow can be used, but it will add additional static pressure to the duct run and can also increase the sound and decrease the performance.
There should be two feet of straight ducting before and after any elbow or bend that is used. We do not believe this is a motor issue at this point, but more of an installation issue. Please contact our Product Support team directly for more assistance at 800-637-1453.
by|May 10, 2024
1 found this answer helpful
Q:What is duct pipe size?
by|Jan 16, 2024
1 Answer
Answer This Question
A: Thank you for your question regarding the AERN80LK ventilation fan. This model uses a 4" duct size.
by|Feb 4, 2024
1 found this answer helpful
Q:I have a 56 square foot bathroom will this unit work properly work in this application
by|Jan 2, 2024
1 Answer
Answer This Question
A: Thank you for your question regarding the AERN110K model. This model is 110 cfm's and designed for rooms 100 square feet or less. This would be suitable for a smaller room and we would recommend having enough make-up air to replace the air it is exhausting. This can be achieved by making sure the door is undercut about an inch or left open to allow the fan to pull fresh air into the room.
by|Jan 3, 2024
Q:Can I use this to replace the fan of AERN110-A? Cost as much as the replacement fan but would love a new cover and springs with it.
by|Dec 29, 2023
1 Answer
Answer This Question
A: Thank you for your question on model AERN110K. This unit is not compatible with the AERN110-A revision. Unfortunately, parts are not designed to be interchangeable between all models.
by|Jan 2, 2024
Q:Does it use a light bulb or led’s?
by|Dec 28, 2023
1 Answer
Answer This Question
A: Thank you for your question on model AERN110K. This is not a lighted unit. If you are wanting a bath fan with similar design and a light feature, please consider AER110LK.
by|May 10, 2024
1 found this answer helpful
Q:How to change filter
by|Nov 18, 2023
1 Answer
Answer This Question
A: Hi Cynt,
Thank you for your question on the AERN110K ventilation fan. There is no filter option available for this ventilation fan.