Customer Reviews for QEP Torque Master 3/5 HP Wet Tile Saw

Love it, I am using it to cut agates to use on a mosaic project.

worked fantastic for the stone I put on the back splash

Worked great for my kitchen back splash tile job. Comes with blade. Excellent purchase

Rating provided by a verified purchaser

Did the job.

New purchase; after cutting just six 12-inch porcelain tiles the saw started making a horrible noise. Discovered that two small bolts on rubber vibration-isolation washers below the blade spindle had come loose and one was grinding on the blade. Tightened carefully with a 7 mm wrench and now sounds OK. Will have to keep an eye on this. Also the blade rusts overnight if left wet - remove and dry every day. The actual cutting works well.

Rating provided by a verified purchaser

I installed a back splash in my kitchen and used the saw to cut the tile. I was extremely pleased with the product and how it performed. This was my first attempt at installing tile of any kind and this product made the job very easy. Put me down as one satisfied customer.

The saw did the job it was designed to do but too much use cause the motor to burn out. Therefore, I had to buy another one to finish the porcelain tiles in two bathrooms. Make sure you purchase the warranty!! Easy exchange!!

had no power and blade wont cut tile

I needed to tile our Great room and Lounge which is approx 600 sq ft and was sceptical if this cutter would cope. It did magnificently. Clean cuts and still going strong. Highly recommended.

Very good little saw for the price. Did nice cuts on quart inch Ceramic Backsplash tile. I would recommend a larger blade for anything thicker.

For the price, it does a good job.

Bought this for cutting stones for tumbling. When they say it's loud they mean it, but it cuts well. Water flow is good with no overspray.

This is a low end wet tile saw. I used it to cut 6" x 6" ceramic tiles and it did a good job for a shower repair (I changed the shower set and had to remove 6 tiles to do this). I don't know if it will cut stone and I am almost positive it won't cut porcelain tiles but for the price it is a good saw. If you want to cut anything but ceramic tiles I would suggest a higher end saw.

Worked great

Works great......Very pleased

Came as advertised Perfect for small jobsPlenty of power

Stopped working after about a dozen cuts on 6-inch bathroom tiles

It really works well for a plastic saw table. The plastic guides are flimsy but work. Not a professional quality tool, but for a homeowner faced with tiling a utility room it's inexpensive and adequate.

Very good

Do not buy this. It sings water and debris forward instead of down and backward. Weird. Cheaply made all plastic. Just does not cut it.

product has been doing the cuts I have needed

Bought this unit in May 2018 for making cuts on a 15 x 18 room on 12''x 24'' tiles.Made clean cuts with ease .The trick was to feed tiles to the blade slowly and allow the machine to cut on it's own .Forcing tile to speed up cuts creates chipped edges.Good product. Will use on 2 other rooms.

Extremely inexpensive but you do get what you pay for, definitely not worth the investment, the cuts are not smooth and the result is chipped edges.

Blade comes loose every time I turn it on.

This saw works great! Not bad for the price. The only thing I see is that it leaves very tiny chips on the cuts. I’m not too concerned about the cut edges because I’m covering them up with baseboard and shoe mold. If you want your cuts to be flawless then invest in a saw with a bigger blade.

The unit came broken. Deep grooves make it difficult to make small cuts as tile then rocks back and forth

Worked great so far

Takes forever to cut tile and is just overall a bad buy