Customer Reviews for RIDGID Wet Debris Application Foam Wet/Dry Vac Cartridge Filter for Most 5 Gallon and Larger RIDGID Shop Vacuums (2-Pack)

To help make these filters easier to clean and last longer I used two dollar The Frost King 15 X 24 air conditioner filter to make a sleeve that slides over the vacuum filter. One A/C filter makes two slip covers, which are CA or rubber cemented at the seam and can be washed and dried as needed. My first set up lasted ten years. I own three Ridgid shop vacs, so filter could get expensive.

Attached are pix of my Ridgid vac filters. The one that looks used, but fine is 22 yrs old and came with my Vac. The 2 pix of a squished one is a brand new filter I bought to to use when the old one was drying from being hosed down. I hosed off the new filter 1 time. This is what it now looks like after 1 cleaning. This is junk. What's wrong?

This filter is amazing. It does everything it says, Cleans easily just with water due to its nonstick surface please filter. Has a nice durable rubber material. Filter is an all in One which is awesome a lot better than the paper filters. I had bought four for all my Ridgid wet Dry vacuums. It fits my older first generation ridgid WD16300 from 2001.

Wet dry vac filters are a maintenance item that can be easy to neglect as they are out of sight but important to the long term performance of your vacuum. I had gone a little too long before replacing mine and picked up the one. Installation is as easy as opening the vacuum, pulling down the wings on the old filter to remove it, and pushing the new one on. I used it to vacuum drywall and tile dust and debris that had fallen into my crawl space from a remodel above and the filter performance was outstanding. I would definitely recommend this and be buying in the future for my vacuum.

I have an old 6-gallon Ridgid vacuum, and this filter is a perfect replacement. This filter is HEPA-rated, and there is a metal grid on the inside for support. One of my photos shows the difference between HEPA and non-HEPA. Detailed instructions are provided with the filter. A bit of overkill for installing and removing a vacuum filter. However, the instructions do provide information on cleaning the filter. This filter can be washed which will increase the life of the filter.

This filter is a well constructed filter. The frame work of the filter is a pliable rubber allowing it to seal well to the vacuum unit with no leaks. The filter material appears to be a good quality material with many pleats. The inside of the filter is supported with a wire mesh. The outside pleats are open for easy cleaning. The filter comes with instructions for installing on different Ridged vacuums. Using the vacuum with this filter shows no sign of reduction of vacuum force caused by a restriction of air flow. The filter does a good job of collection fine dust.

This RIDGID VF8000 HEPA filter is a perfect fit for my 9 gallon RIDGID wet/dry shop vacuum. Made much better than my old filter, It's a snug fit and will fit 5 gallon to 16 gallon RIDGID shop vacs. Locks in place and is a very snug fit to catch all the debris you are vacuuming up. This filter is 8.75 in high x 6.75 O.D. in diameter. This filter has a wire mesh on the inside to keep the filter from collapsing like my old filter did. This filter is washable and can pick up water, saw dust, pollens, dust mites, mold, cold ashes, fine powder, pet dander, drywall dust and many more things that this filter will catch. Filter can be removed when picking up liquids. This is NOT a paper filter, it's like plastic fins on the outside which makes it washable. ( my photos show the old and newer filter ) When washing out you can soak it in a container with some dish detergent for an hour or 2 then take out and hose it off and let fully dry before using it again, DO NOT use compressed air to blow off the filter, high pressure of air can damage the filter. Once again a great upgrade from the older filters that come with shop vacs from the manufacturer. Well made with silicone gaskets instead of the old rubber seals from the older filters. Great filter, pick one up for your RIDGID shop vac !

I like this RIDGID vacuum filter. I have an older 5 gallon vacuum that needed a new filter. The HEPA filter is the one I selected. Compared to my old filter these are a heavier construction. The plastic molding is thicker. Inside is a plastic netting reinforcement that will prevent a clogged filter from collapsing. Also, I think this one will get more of the fine dust I tend to produce. This one is cleaned by tapping and can be washed in soapy water. I’ll try that soon.

I use my Ridgid vacuum all the time and the filter really does help to keep the dust down as well as protect the motor. I have a 12 Gal vac. That has a lable for VF7000 filters but this VF8000 fits also. After installing the new filter I can hear the vacuum running smother and not working as hard to suck up dirt and dust. My old filter was clogged up from vacuuming up Concrete dust when I resurfaced my Floor and used it to keep dust from filling up the house. I had a bag installed as well but the filter trapped all the fine particales. Bags alone do not stop all the dust from returning back into the air in the room a good filter is a must have. If you ever sanded drywall or grinded concrete you know the amount of dust it makes and it goes everywere in the house. A good Vacuum with a good filter is a must or you will spand days cleaning up the mess. My old filter was over a year old and I could of cleaned it one more time maybe but I beleive its time to replace before the fins just give out. When something works this good you stick with it. This filter has no flaw well made and does its job, fits tight and seals great.

​This filter (VF8000) is much stronger, better made than the Rigid paper filter that ships with most wet/dry vacs. The inside is reinforced with an internal mesh core. The outer paper feels much stronger, and it's washable (for a wet dry vac this seems so obvious, but the original (VF4000) is not rated for wet debris, I didn't know that. The top is a thicker rubber/silicon and the bottom has substance and is sealed against the filter wall, versus the paper filter whose bottom is very thin. Installation was very easy, pull off the old, dirty filter, and replace it with this new clean cartridge filter. Be sure to press down the center till it clicks in place, you see the plastic "V" holed jump into the center holding the filter in tightly. T This is a true HEPA filter filtering out much more than the standard filter. As soon as you replace the original filter with this filter you will hear a difference in the sound the wet/dry vac makes. T​his is a real upgrade​, it will also last much longer than the original paper filter.

My review of the Ridgid HEPA Wet/Dry Vac Replacement Cartridge Filter for Most 5 Gallon and Larger RIDGID Shop Vacuums. Typically I buy the normal ridgid shop vacuum filters. This time I decided to give the new HEPA filter a in the vacuum I use in my vacuum in the woodshop. Upon first glance the Hepa filter is built better . It has an integral metal grill. Visibly thicker, the seals are bigger and the filter weighs more. Installs like a normal filter my uses a nut but it has quicklock technology for vacuums that have feature. Once installed you could tell the difference the air in shop seemed much cleaner. The filter is also reusable . So the extra cost is not that bad. I just got it so we will see how it works out long term

Great filter, but a little pricier than the standard Black one. It is however well worth the cost since you can wash and reuse. I tend to use the Black standard filters longer than recommended but I have found that if I take the time to clean the pleats (no water), it extends the life span. The one thing that can derail my process is if the standard filter gets wet as it becomes stiff, pleats stick together, harder to clean and clogs easily as the pleats are a kind of cardboard like material. The pleats on this Orange filter seem to be a synthetic like material that should maintain their natural shape and clean easily. I also like the mesh internals to provide a stiffer consistent shape. I can now use my RIDGID vacuum without concern of slightly wet areas and more importantly to remove excess water as needed in slightly flooded situations.

This new HEPA filter fits my Ridgid shop vac without issues. It's a very snug fit (like you'd expect a filter to be). There's an included instruction sheet on how to install/remove the filter from the vacuum. The manufacturer calls it a "Qwik Lock" system. Once installed it leaves no gaps for air to get around the filter. Fit and finish is excellent. The listed dimensions are: H 8.75 in, W 6.75 in, D 6.75 in. See photos below. The filter is of better construction than the OEM filter that came with the vac - see photo below. It's washable and reusable and, of course, can be removed when vacuuming up liquids and reinstalled for dry materials. In vacuuming up some sawdust from my basement shop floor there were no discernable "dust trails" or such coming out of the vacuum's exhaust - the filter appeared to catch everything being thrown at it. It should be noted that, when used in conjunction with a Ridgid shop vac, there is no guarantee that the filter will provide HEPA level filtration (I suppose that's because the manufacturer can't be certain that your vac doesn't have a leak of some sort). I generally wear a mask when cleaning up the shop; if you're sensitive to allergens and such you might want to do the same and not rely on the filter alone. There are other models of this filter for filtering out finer particles but, for my DIY home shop purposes, this filter does the job. It works as advertised (for me, YMMV) and is washable and reusable, and fits my Ridgid vac. Home Depot offers a 90 day return policy on the filter (see their website for details on that).

I grid floors and they keep the dust free

I purchased some off brand filters that were spec'd to fit my old WD06701 6 Gallon Wet/Dry Vac. Yes, the off-brand was less costly but the filter media did not appear as robust as the VF5200 filters. The off-brands also did not fit as well even with some universal adapters. I was very impressed with its construction quality and overall fit. I feel that the $7.00 premium price over a generic was well worth the expense. I also decided to use a pool filter mesh cover to see how it keep larger particles from imbedding in the filter.

These was easy to put together and works well. Use it mainly to vacuum water in our building that doesn't have drains. It is great having the large capacity. Filter changes are a snap also.

This did not fit well on my older Craftsman 16 gal. shop vac. I made it work, but it is actually a little too long.

Slid right on my old Ridgid Shopvac. no problems.. and pretty affordable 2 pack.

This thing is literally just a glorified hollow piece of foam that is glued to the plastic Ridgid adapter. It is literally way too expensive for what it is.

I purchased the wall mount VacMaster vacuum from Home Depot online. The order system recommended I also purchase a 2-count package of replacement filters (Rigid brand). I thought that would be a good idea. It wasn't. These filters will not fit the VacMaster vacuum. The Vaacmaster filter is open on top and bottom, the Rigid ones suggested here are closed on top and so cannot fit. (see picture attached) I gave the filters high marks for the review because I suspect they work well in OTHER vacuums but not the VacMaster wall mounted one.

Filters tinny dust particles, wouldn't recommend using this to vacuum liquids. There's a separate water resistant one they sell to

I have used this filter to clean up drywall dust in my Rigid shop vac over the last 4 years. This filter has worked great for this application. It is easy to install. This filter has met my expectations and there isn't anything that I dislike about it.

Works great.

Thus filter is more than adequite for shop and jobsite work. It fits tightly on the vac so there is no leakage around the filter. I use it for collecting dust from sanders and picking up dust that my larger dust collection system misses from my jointer, planer, table saw, etc.

Wow I'm still excited beyond belief

Truly a great filter, super easy to replace never have had a fitment issue, Use it with my 14 gallon shop-vac, saw dust, drywall dust, as well as cleaning my BBQ smoker. Never a issue of suction highly recommend this filter

Barely any dust in air

The RIDGID model VF5000 fine dust wet/dry vac filter works wonderful. I've rinse and let the filter fully dry for reuse once so far. The QwikLock fastening makes it super easy to install and remove from the filter cage, so no more using a filter plate nor screw nut. I have used the filter for many drywall and sawdust clean up. It's very functional!! The filter fits 5-20 gallon wet/dry vac. Very easy to install into your wet/dry vac.

This was the exact filter we needed for our Ridgid Rinse&Vac

Worked great