Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Rapid Set Mortar Mix is a high-quality mortar that is suitable for vertical and overhead applications. It is ideal when rapid strength gain, high durability, and low shrinkage are desired. Use Mortar Mix for general and structural concrete repair, stucco and plaster repair, 1-coat exterior plaster, mortar beds, underlayment, and formed work. Mortar Mix sets in 15 minutes and is ready to drive or build on in 1 hour. Durable in wet environments, it can be applied from 1/2 in. to 6 in. thick. Mortar Mix is a blend of high-performance Rapid Set cement with quality sand. Mortar Mix offers superior resistance to chemical attack. It is non-metallic and no chlorides are added. Mortar Mix allows the repair areas to be painted, coated, or sealed quickly after application. Under dry conditions, water-based coatings such as latex paint can be applied after the product is hardened, which usually takes 1-4 hours. Solvent-based and impermeable coatings such as oil-based paint and epoxy can be applied in 16 hours.
 and Mortar Mix (202207958)_4.jpg)
Coverage Area (cu. ft.): 0.23 cu ft
Coverage Area (cu. ft.) | 0.23 cu ft |
|---|
Color Family | Beige |
|---|---|
Compression Strength (psi) | 6500 psi |
Features | Crack Resistant, Fast Setting, Paintable, Pre-Mixed, Sealable, Stainable |
Mortar Mix Type | All Purpose |
Product Weight (lb.) | 25 lb |
Working Time (min.) | 15 min |
Manufacturer Warranty | 1-Year Limited Warranty |
|---|
Yes this will work perfectly. If your repair needs to be less than an half of inch thick use the Rapidset Cement All
Yes this can be used to reset bricks. Those classifications our for Portland cement based mortars. Rapidset Mortar mix is a CSA cement and Conforms to: ASTM C387, C928.
According to there data sheet this would a suitable application.
Yes this will work for cmu block walls. Those classifications our for Portland cement based mortars. Rapidset Mortar mix is a CSA cement and Conforms to: ASTM C387, C928.
No, it would crumble. You would need a refractory mortar like Rustland. Its made to withstand high heat.
This product is not intended for extended exposure over 212°F (100°C).
There are many factors that could cause a delayed set time. I would recommend going back to your local home depot and have them contacting the local Rapidset Rep.
I would use an exterior gran thin set for this application.
Viewing 1-8 of 443
4.5 out of 5