2000-Watt Marine Wind Turbine Power Generator

The current model of the turbine is not compatible with lithium batteries. The internal built-in MPPT charge controller has no manual adjustments for the cut-in and cut-off voltages and automatically detects lead-acid battery only. Lithium batteries require constant current and constant voltage to charge, which is not possible with the current model. We are making our future model turbine lithium-ready, the wind turbine has a brake function in high excessive winds and adjusts according to battery voltage. The built-in MPPT controller has an equalization stage as an automatic stage that cannot be turned off. When this stage kicks in, it will pulse high voltages of 15.3-15.8V into the battery, causing your lithium battery internal BMS to go into high voltage disconnect protection. At this stage, the battery goes into open circuit and the charger disconnect before starting once it resets, resetting could be automatic or manual. This is to protect the turbine from self-damage. For any additional questions, please feel free to call the Nature Power tech support and customer service line at 1800-588-0590.

Yes, it is possible to mount turbine 600 feet away from batteries. However, the distance between the wind turbine and the batteries can affect the efficiency of the system. The longer the distance, the more energy is lost due to resistance in the wires. You may need to use thicker wires or increase the voltage to minimize energy loss. It is also important to ensure that the batteries are properly charged and maintained to maximize their lifespan. Please feel to contact Nature Power tech support at 1800-588-0590 for any questions.

The Nature Power Marine Wind Turbine, 2000W, is a great option if you live in an especially wet and windy area or are looking for a turbine to position in or by a body of water or on a boat. It has 3 carbon fiber blades and a body made of durable cast aluminum. It also has overspeed protection and is splash-proof and able to withstand inclement weather. This turbine is suitable for charging a lead acid deep cycle battery bank system (24V) for off-grid land and marine applications, it has a cut-in speed of 7 mph Quiet operation silent blades design. it can be combined with an exciting solar system to charge the same battery. For any additional questions. Please feel free to contact the Nature Power customer service/ tech support line at1800-588-0590. Hours of operation are Monday Through Friday, 9AM to 5PM Eastern standard time.

It depends on the type of tower you are using; the manufacturer does provide that information. the tower is not included w the turbine,

According to the manual, the thrust is 231lbf(105kgf) (at a wind speed of 49.2m/s, 110mph,177KPH).

This turbine will not produce any power at those high excessive wind speeds, this turbine has a built in MTTP controller, which will only operate on a functioning battery, power produced between 12-45mph wind speed

This turbine will not produce any power at those high excessive wind speeds, this turbine has a built in MTTP controller, which will only operate on a functioning battery with some voltage for the controller to be able to recognize. The controller has a built-in brake function that will stop the turbine from turning during high excessive wind or if the batteries are full. This is called a protective mode. if the turbine stopped turning due to high wind speed, the controller is programmed to brake the wind turbine for half an hour. after this period. it checks to see if conditions change, it will restart again. Here are some points to consider when operating this turbine. 1.In a Voltage that is more than 28.7V, the controller will consider the battery full, the wind turbine will get into protection mode. It will Wait 30 minutes, check the battery bank voltage, if it is less than 26.2V, the wind turbine will restart again. 2. This turbine is best operated with areas of wind speed between 12-45 mph, If the wind speed is over 45mph(20m/s), at this time, the wind turbine reaches the maximum power, the wind turbine will get into power protection mode, it will stop 30minutes, then restart again. 3. Turbine is equipped with regenerative electromagnetic braking system. Over wind protection, according to the built-in controller design, once the wind turbine speed reaches 1000RPM, the program will consider the wind speed over 45mph, it will stop around 8 minutes, then restart again. This design main reason is to prevent instantaneous huge wind speed from damaging the blades or the alternator Please feel free to call Nature Power wind turbine tech support service. Customer service number is 1800-588-0590.

This Turbine has to be connected to a battery bank , 24V , at least, 400Ah Deep cycle battery bank. what determines if your system is off grid or not is your inverter. if your system is battery based , then this will work to charge a 24V bank only. it can not be connected directly to your grid, I hope that this will clear any confusion, for any more questions, please feel free to contact Nature Power tech support at 1-800-588-0599.

You would need a 24V inverter with a 220V output, connected directly from the battery,or battery bank, negative and positive leads. Please feel free to contact Nature Power at 1800-588-0590 for any more questions.

Specifications Tab list MAX Wind speed rating for witch Manufacture warrant. Warranty / Certifications Manufacturer Warranty = 110 in this case. Ultimately tower is primary consideration ~~~ as in an Chain is only as strong as it's weakest link. IF, and we say IF tower is solid ~~~ Manufacturer say 110 miles per hour (MPH)... and this being a water vessel, would be how secured to to deck the tower mount is secured...

This turbine could withstand hurricane winds of up to a 110 MPH. please feel free to contact nature Power at 1800-588-0590 for any Questions.