3/8 in. Torque Wrench with Square-Drive Ratchet Head

This torque wrench is perfect for any light torque application covering about 3 to 20 ft lbs. It’s 11 inches long with an ultra compact head for getting into tight spaces, yet uses a 3/8” square drive anvil covering the most common range of fastener sizes without needing an adapter. The torque locking ring operates smoothly and precisely and snaps right to the setting when released. The semi-recessed quick release on the ratchet head is a nice bonus feature. The torque setting scales are easy to read. The chrome is impeccable. Finally, it has a very impressive click for a wrench this size and torque range, an issue that plagues lesser quality wrenches. To sum up fit and feel, build quality is second to none. This is without doubt a professional class tool. In terms of performance, mine achieved less than 2% tolerance both CW and CCW (for reverse threaded fasteners) on all but one setting; 50 in lbs CCW came in at 2.2%. The ratcheting mechanism only has 24 teeth, but operates smoothly and even in tight spaces, it’s only being used to finish torqueing a fastener, so is perfectly fine in my book. Also, its compact head makes the low tooth count even more of a non-issue. The torque wrench comes in a quality blow molded case with secure clasps. It is a little on the pricey side, but well worth it considering the sensitive components you’ll likely be torqueing on and the convenience of your local Home Depot if you ever have an issue. In terms of country of origin, the manual it comes with states “Made in USA of domestic and global components”. Knowing a fair amt about torque wrench manufacturers, I am 99% certain the breakdown is as follows: wrench and case are USA, ratchet head is Taiwan, final assembly and testing are USA. The components are all top notch, with the most important part, the wrench itself including the torque mechanism, being USA.

This is a high end, professional torque wrench. If you are looking for precision and accuracy when tightening fasteners, look no further. The torque range setting are clearly marked on the handle and retaining dial. Setting the correct torque value is smooth compared to other torque wrenches. Be sure to include the calibration settings before you use the tool. The wrench "clicks" when the proper torque is reached. It comes with a case to prevent damage when transported and stored.

This Klein 3/8” Torque Wrench appears to be of very high quality. It comes in a good hard case, and includes a Certificate of Calibration, and the Manual includes formulas for using extensions and adapters. It also comes packed with a corrosion inhibitor packet. It measures in both English and Metric, though I’ll probably never use it for anything other than English. The graduations are clearly marked, but my old eyes need good light to see them. The English values shown on the tool range from 30 to 260 in. lbs. The included Calibration Certificate ranges from 50 to 250 in. lbs., so I assume that accuracy might not be as exact above or below those calibrated specs. This Klein Torque Wrench will prove very valuable for those tasks requiring 3/8” drive and accurate in. lb. torque.

this is my first torque wrench, i have used them on loan from the auto parts store, this is my first purchase. the wrench comes with a strong plastic storage case, nice. this torque wrench is calibrated in inch/pounds, in/lb. a lot of torque specs are in foot pounds, 12 in/lb = 1 ft/lb. because it sets to the in/lb it is much more precise then ft/bl wrenches. it is well made, nice quality and works well. i love it.

I would have given the tool 5 stars for quality, but the numbers for setting are too small even with readers. So not the easiest to adjust for torque setting.

[This review was collected as part of a promotion.] Hey all you people , hey all you people , hey all you people won’t you listen to me !!! I just bought a Klein tool , no ordinary Klein tool . I don’t have the tool but I heard it is an amazing tool , so amazing I’m saving up for it .

Purchased (3) Klein torque wrenches.(1) wrench with a 1/2” square head 20” length for heavy duty torquing.Lugs,hubs and exhaust work and/or repairs.(2) wrenches with a 3/8” square head in a 14” length and a 10” length for lighter duty torquing and engine work.Nice to have dependable and reliable.

Made in USA

Rating provided by a verified purchaser