5-7/8 in. x 50 Carbide Teeth Aluminum Cutting Circular Saw Blade

I’ve been using this Milwaukee 5-3/8" Metal Cutting Blade on my M12 circular saw, and it’s a total game-changer. If you’re still using those old-school abrasive wheels that throw sparks everywhere and wear down in five minutes, you need to switch. The first thing I noticed is how incredibly clean the cuts are. I’ve been running it through EMT conduit, strut, and even some stainless, and it leaves a burr-free edge that’s actually cool to the touch. You don't have to spend forever filing down the ends before you can use them. The thin kerf makes a huge difference, especially on the M12 platform. Since it's a smaller saw, you need all the efficiency you can get, and this blade doesn't bog down the motor at all. I’m getting way more cuts per battery charge than I expected. It’s also surprisingly quiet and doesn't "walk" or vibrate when you start a cut. It’s definitely pricier than a cheap abrasive disc, but it lasts so much longer that it pays for itself pretty quickly. Just make sure you’re using it on the right materials—don't try to force it through super thick plate steel or you'll dull the carbide tips. For electrical and HVAC work, this is the only blade I’m keeping in my bag.

I love these blades! They cut smoothly, stay sharp, and are surprisingly quiet. I grew up in an era when everything made ear bleeding noise and somehow the folks at Milwaukee found a way to make a saw blade that seems to never get dull and is quiet. AMAZING!

Quality blades and a good price when on sale

I’m glad I took the advice of another reviewer on circ saw to upgrade to this blade. It cut great with no bogging or binding plunge cutting floor registers in finished hardwood. Compared to the stock included blade, cuts went from great to amazing. I am running the M12 XC4.0 battery but I hope to buy the high output 5.0 battery soon; I’ll be even more pleased with the performance (although this saw performs so good for my needs, I don’t know if that’s even possible). I bought the framing blade for all other quick cut work too.

[This review was collected as part of a promotion.] Great blade for cutting aluminum and other soft metals. My husband has been using it to cut wood as well, but it’s not the best for curing wood, works great for soft metal like aluminum. Would recommend it for any type of soft metal cuts.

[This review was collected as part of a promotion.] The Milwaukee 7-14" Metal cutting circular saw blade works great with my cordless circular saw. I am using this blade to cut 1/4" aluminum sheet and corrugated 29-gauge roof panels. It cuts like butter through both materials. The blade seems to track well and provides burr-free straight cuts with ease. I am using this blade without additional lubricant and it seems to cut well without getting too hot. So far I am very happy with this blade.

[This review was collected as part of a promotion.] I got the Milwaukee 7-1/4 metal cutting circular saw blade for my husband and he was overjoyed when I showed him this blade. He immediately went out to the garage and started to use it . He said it was the best blade he's ever used. Thanks you for a very very happy husband.

[This review was collected as part of a promotion.] I have been doing some work on an old outbuilding getting ready for the winter to come and needed to replace some tin and always wanted a saw blade that was up to the task. This Milwaukee Metal cutting blade knocks it out of the park. Not only does it cut like there’s nothing there it’s not excessive in noise doing it’s job. Great choice and can’t wait to try it on something a little more hefty then just tin sheathing.

[This review was collected as part of a promotion.] I don’t do a lot of metal cutting but did have a small home improvement project I was working on recently and was glad to get this blade. It made my job a whole lot easier. It cut smoothly through the pipe I was cutting as well as the aluminum sheets and rail pieces I was working on. The edges were smooth and not jagged so that was a plus. I was using a cordless saw and it did the job perfectly. Overall I was very impressed with how well this blade cut. Oh and be sure to wear some safety glasses as as there were bits of metal shavings when sawing.