1 qt. Clear Semi-Gloss Water-Based Interior Polyurethane - Crystal Clear
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
This non-yellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, shiplap paneling, woodwork, and floors. As it dries crystal clear, you can use it over light-colored or white stains with confidence. ZAR Interior Water Base Poly Crystal Clear is Exotic Hardwood Approved and is ideal for use on Teak, Brazilian Walnut and other similar wood species. ZAR Interior Water Base Poly Crystal Clear combines the beauty and durability of an oil-based polyurethane with the environmental benefits of a water-based clear finish. The fast-drying, low-odor formula resists most household chemicals and abrasions. The product's full-bodied formula brushes on like conventional polyurethane for maximum durability and beauty. ZAR Interior Water Base Poly Crystal Clear meets all environmental standards for low emission of solvent vapors.
Highlights
- Formerly AquaZAR polyurethane
- Durable floor finish
- Full body, high film build formula
- Non-yellowing, dries crystal clear
- Interior, horizontal or vertical surfaces
- Perfect for light-colored stains
- Coverage: 100 sq. ft. - 125 sq. ft. per quart
- Application tools: synthetic fiber or foam brush, pad, spray
- Dry time: 30 minutes to touch
- Recoat time: 2 hours
- Coats: 2-3 (3 on floors)
- Spray specifications can be found in "info and guides" section
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Container Size | 1 Quart |
|---|---|
Coverage Area (sq. ft.) | 125 sq ft |
Details
Application | Shellac, Lacquer & Polyurethane |
|---|---|
Application Method | Brush, Pad |
Base Material | Water Based |
Coating Product Category | Waterproofer/Sealer |
Color Family | Clear |
Dry to Touch (min.) | 30 |
Interior/Exterior | Interior |
Number of coats recommended | 2 |
Number per Package | 1 |
Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Abrasion Resistant, Dries Clear, Durable, Fast Drying, High Foot Traffic, Low Odor, Sealer |
Product Form | Liquid |
Returnable | 90-Day |
Sheen | Semi-Gloss |
Substrate Condition | Bare Wood, Finished Wood, Old/Reclaimed Wood, Plywood, Stained Wood, Unfinished Wood |
Surface Material Use | Wood |
Time before recoating (hours) | 2 |
Transparency | Clear |
Vertical/Horizontal | Vertical / Horizontal |
Warranty / Certifications
Manufacturer Warranty | No |
|---|
Questions & Answers
Can this be used to finish bathroom tile that has been primed and painted?
No - this is not an application for this product
Can this product be used over de-waxed shellac, such as Zinsser SealCoat?
I do know many that have done this in the past, but if the other manufacturer has modified or changed the product it may not. We would suggest doing a small test area first.
What is the walk on dry time for this product?
Maryann, Floor Application :A minimum of three coats is required. Allow floors to dry 24hours before subjecting to light foot traffic; 3-5 days before moderate (normal) traffic or moving furniture. To avoid marring floor, lift and place furniture. One week is required before maximum hardness is achieved. Do not cover floors with rugs before one week has elapsed. See the full Product Data Sheet at this link: https://images.thdstatic.com/catalog/pdfImages/00/0008a3fc-ea09-4ca2-9f9e-060ea0607813.pdf
How long does it take for this product to fully cure when 3 coats are applied on floors? Thank you.
kluce - Thank you for your question. Please see the "Floor Application" section on page two of this link: https://images.thdstatic.com/catalog/pdfImages/00/0008a3fc-ea09-4ca2-9f9e-060ea0607813.pdf You can also view the label at this link: https://images.thdstatic.com/catalog/pdfImages/e1/e1c15d5e-e068-4260-8a63-77d2629159de.pdf
Can this product be used to coat a painted laminate countertop? Is this product food safe?
Janis - Products are no longer tested for direct food contact. It would be suggested to to a small test area over the paint you have and do an adhesion test before proceeding on the entire project. ZAR water-based polyurethane is design for use on wood surfaces - we do not test compatibility over paints.
Do I need sand between coats? If so what grain sandpaper?
Bendy - Thank you for the great question. You do not need to sand in between coats if you are within the recoat time period (4-6 hours or so) but sanding in between coats will provide a much smoother feel and appearance. Lightly sand with a fine grit (220 or finer) or use a synthetic steel wool pad (do not use steel wool with water-based polyurethanes) and remove all sanding dust prior to applying your next coat of ZAR® Crystal Clear.
Can this be used over latex paint?
Krobi - Thank you for your question. While we do not mention using this product over existing paint, many users have done so. The surface should be clean, dry and low sheen. I suggest doing a small test area and perform an adhesion test before moving forward with the project. Thanks for considering ZAR® Polyurethane for your project!
Can this be used over stain? (Such as minwax)
Marty - Thank you for the question. Yes, this product can be used with wood stains. It can used over multiple brands of stain (we always suggest using ZAR® Stain). A word of caution when using Minwax, they have certain colors that they do not recommend using a water-based polyurethane over - check the label for details. You will find ZAR® Crystal Clear Polyurethane to be a hard and scratch resistant finish that also be used on wood floors.
Viewing 1-8 of 10
Customer Reviews
4.8 out of 5
