1/2 in. Drive Metric 6-Point Impact Socket Set with Storage Case (11-Piece)

It comes open, pieces falling out of the box . Im going to go to the store and return it

I bought this specific set because in the description, it says two cases. I did not receive the two cases to hold the sockets. I received one case and the other set of sockets had the package ripped open and the sockets loosely in the box. I would like to be sent a replacement box for my standard sockets.

These are very good, quality looking impact sockets and should meet my needs. However, don’t be fooled by the storage case photos. Only the metric set of mine came in the displayed plastic case, and that is plastic molded arriving with a side latch broken. The SAE set was in a plastic pack attached to a plastic “socket rail” that was destroyed during shipping. So I will be looking for a sturdier socket storage solution to hold this set.

The inside was messy when opened, and after finishing, I found that a 22mm part was missing.Please send additional 22mm

There's a lot to like about this impact sockets set, it has a perfect combination of sizes both SAE and metric. The case is sturdy and well organized. The socket design is well thought out, and they work well with both ball and ring detents. The two extensions and the swivel add everything you need in a socket set. On the negative side four of the deep sockets had a finish that was not the same as the rest of the set, see the picture below, and their engraving was hard to read. The price was right, and the life time warranty made this set and great purchase.

this set feels very solid and good quality. comes in a plastic case, well organized. I mainly got this set to use with my Milwaukee M12 3/8 stubby. works great with o-ring drive. I'm sure itll work with pin detent as well.

Overall I think this is a great set of sockets, they look well made and the couple I tried had a good fit. The little set of common sockets with the extension is really nice. I wish the entire set was labeled like those were. Like others had mentioned, most the sockets are nice and shiny with the size etched on. The size is not real easily read however and would be an issue in poor light. There are about 6 different sockets in this set that are not shiny and are instead have the powder coating applied and not shined up at all. The issue is the sizes of these particular ones are very difficult to read. A couple of these ones were also very dirty/oily etc. that requited cleanup. This would be a all-star set if these few were better.

I would recommend this Impact Set. With 64 pieces included in this set, you have lots of options. Both SAE and Metric makes it easy to use on different jobs. The carry case is great. The set feels solid and strong. The set offers a lifetime warranty, which is great with any tool. 6 Point style of sockets helps with reducing the chance of rounding fasteners. Can be used with your impact drive tools. Large writing on each socket makes it easy to locate the tool needed.

This review is for the Husky 1/2 in. Drive SAE/Metric Impact Socket Set (64-Piece) Model # H64IMPS. These are six point impact sockets with thick walls which results in the set being approximately 27 pounds. The set includes 15 sizes of standard SAE sockets, 15 sizes of standard metric sockets, 15 sizes of deep SAE sockets, 15 sizes of deep metric sockets, two 1/2 inch extension bars, a 1/2 to 3/8 adapter and a 1/2 universal joint. The sockets feature two pin holes for secure retention. They have a black finish with stamped size markings. The sockets are well built and should last a lifetime but they carry a lifetime warranty in case you have any problems. My set had oil and burs on some of the sockets left behind from manufacturing. The oil also made the finish look uneven but once I wiped them clean they looked good. On some of the sockets I could feel a lip in the inside edge where a bolt would go. I don’t think this will impact fasteners fitting into the socket. In addition, I found some of the size stamping inconsistent. Some sockets it looked deep and easily readable and a few it looked shallow and not easily readable. The case is included and absolutely necessary for a set of this size. It has quality latches on the front that should last many years. It also has side latches to support the weight of the sockets and unfortunately, Husky chose to use cheap plastic latches that will absolutely break off after numerous open and close cycles. Each socket has a molded home in the set and the ones in the lid are tight to keep them from falling out. Overall this is a great set and highly recommended. I’m only giving it 4 stars because of the inconsistent size markings, oily surfaces, loose burs in the case and the cheap side latches.

The Husky 1/2 in. Drive SAE/Metric 64 piece Impact Socket Set is FANTASTIC!! It has everything from 3/8 up to 1-5/16 SAE and 13 - 27mm Metric in both standard and deep well sockets, Comes with 2 extensions, 1/2 to 3/8 adaptor, a universal joint, and a solid case to store it all in. The sockets are all marked with large writing and are very easy to read.