Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The easy to install reinforced Wax Toilet Bowl Gasket features a polyethylene flange for floor and wall bowls. Packaged in a plastic sleeve in order to maintain its shape. Accommodates 3 in. and 4 in. waste lines (sold separately). Includes a 1/4 in. x 2-1/4 in. E-Z Snap brass bolt kit.
Dimensions: H 1.88 in, W 6 in, D 6 in
Product Depth (in.) | 6 in |
|---|---|
Product Height (in.) | 1.88 in |
Product Width (in.) | 6 in |
Color/Finish Family | Brown |
|---|---|
Features | Double Thick Seal |
Included | Flange Included |
Material | Wax |
Pack Size | 1 |
Plumbing Part Type | Toilet Wax Ring |
Returnable | 90-Day |
Manufacturer Warranty | 1 year |
|---|
No, just one. May not need the bolts if nothing's wrong with the original ones. I'd scrap off all the old wax by being careful not to drop it down the pipe.
Please contact us at technical@oatey.com or call 1-800-321-9532 and select the technical option for assistance and information on this product.
No just one.
No, only one. probably just showing alternative method of installation. Go ahead and get new bolts if you are resetting a toilet along with the wax ring.If your flange, "the thing that the toilet sits over", is bent or corroded really badly you would need to replace it as well. Do Not over tighten the bolts when you set the toilet, you don't want to break the base, just make the bolts snug.
You only need one.
No, just the one wax ring will do. Some people turn over the bowl and press the wax ring in place with the rubber gasket pointing up ( it should stick in place ). Then they flip the bowl right side up and set it on top of the closet flange (toilet drain opening) using the flange bolts poking up through the bolt holes in the toilet bowl base as a guide as they carefully set the bowl in place. Once you’re certain that it is properly seated over the closet flange you can push the bowl down harder, using your knees and weight if you have to, compacting the wax ring until the bowl is resting completely on the floor. Some people do basically the same thing except they place the wax ring right on top of the closet flange (rubber gasket down) and then set the toilet. While this method may seem easier, I think it is actually easier to make sure the wax ring is seated properly using the first method (if you aren’t as experienced installing toilets) because you can feel the rubber gasket set inside the closet flange as you are gently lowering the the bowl.
Sounds like the ring bolted to the floor is to tall. If so, more wax won't help. If it is flush or up no more then 1/4 inch then put down a wax ring with flange and one without flange On top of it.
This is a heavy duty wax ring. It has more material and give you a better seal. Also, if you have a tile or laminate floor that is a little higher than the concrete, this will ring will fill the extra height and give you a better seal in my opinion.
No. You need to level the floor or use toilet shims. A thicker ring will do nothing to stop a rocking commode!
No you only need new gasket , and toilet shims from Home Depot, to keep toilet from rocking Shin to be placed where toilet rocks place shims under toilet on floor under bowel flush then call with Alex latex silicone caulk, after caulking wipe under bowel with finger have bucket of water with old cloth you can damp, then repeatedly wipe till no excess caulk is left drys to clean neat job , always replace toilet flange bolts that come with new wax ring.
Yes you do another thing to look for is to see if the nuts have came off of the bolts. After replacing those if ur still having that problem you can use a wedge and just cut off the excess material then use caulking to fill around the base of the toilet!!!
Please contact us at technical@oatey.com or call 1-800-321-9532 and select the technical option for assistance and information on this product.
Working fine now
The wax ring does not prevent movement, it just seals. The movement is prevented by the two bolts shown in the photo which attach the toilet base to the waste pipe.
Sounds like you have more problems than a wax ring, you need to figure out the wobbling and then put in the ring. A ring is only used to seal the flow of the water. This ring is a good one once you have the wobble figured out.
It may be a broken flange, a broken bolt, or damged subfloor. Less likely a wax ring
#1 has no bolts #3 comes with bolts.
Thickness of seal is the difference
Yes - the #3 is thicker and includes the bolts. The - #1 is a standard thickness. Same materials.
The thickness. A #3 has more wax then a #1
The #001008 is the multi pack and is not reinforced like #004301-SP and does not include bolts.
Check the water level, proper water levels are not near the flush lever.
If you are referring to the screws that hold the toilet to the floor then the Wax Ring seal is likely broken. You will need to replace the Wax Ring and make sure the toilet is not moving or rocking once re-installed.
If I were you I would get a professional.
I take it for granted your not talking about the tank bolts but the toilet bolts. Run a pencil mark around the bowl floor. Remove the bowl and run a Snake down the 3" opening to make sure you don't have a stoppage back up. Remove the old wax gasket and clean the complete area. Install a 3" wax toilet bowl gasket with a vinyl reinforcement. Then use a plain gasket and remove a small piece to put around the flange bolts to hold them up. Press the rest of the gasket into the reinforced gasket. Dump a some of mixed plaster inside the pencil mark. Drop the bowl on top of the plaster sit on the bowl then tighten the bolt screws watching out that you don't over-tighten or the bowl will crack. In about a month return and tighten the bolts again, about on full turn or until snug. Your in you little devil plumber.
a all kits for repair
The bowl gasket don't go bad. If you have water coming from the bottom of the bowl you have a stoppage. You could drop the bowl in without a wax ring and still have no leak. The wax ring is to stop gasses which can actually kill you. Reset the bowl by reading my previous email.
It will start to smell in the bathroom. If the seal is not perfect then sewer gas will make its way in. If the seal is really bad then water will start making its way to the sub floor.
Read my previous answer.
when I take off the toilet
If your toilet is leaking at the base or the seal has failed in some way then this can be due to an improper installation or other factors that can lead to a Wax Ring failure. Wax does not just fail out of the blue because something is wrong with the wax; it is usually due to other contributing factors. For further details please call Oatey Technical to discuss your issue at 1-800-203-1155.
YES
1 size fits all.
Measure the distance from he back of the bowl wall to one of the flange bolts this is your bowl size.
No it’s a one size rinThe height
Properly installed toilet Flange will be sitting on the finished floor. When this is the case you can use a standard Wax Gasket (approx. .9" tall). If the Fange is anywhere BELOW that you can use a thicker Wax Ring (Jumbo) which is 1.25" tall or if your Flange is lower yet, then you would need to install a spacer kit to bring up the level of the Flange to the proper height. This is commonly needed after installing a tiled floor over an existing floor.
Please contact tecnical@oatey.com or call us at 18003219532 for further product support.
SIX INCHES
3" the size of the vinyl pipe. Home Depot had a better one but they were out of stock.
From the bowl back wall to one flange bolt is your bowl size. See my email on resetting a bowl.
some are 3" and some are 4", it really doesn't matter.
This wax ring measures 6 inches in diameter by 1.88 inches in height.
Viewing 1-7 of 7
4.7 out of 5