#1 Home Improvement Retailer

Internet # 100193061

Model # CSSD54-48 X

Store SKU # 344982

Product Images

ProCoat 1/2 in. FIP x 1/2 in. MIP x 48 in. Stainless Steel Gas Connector 1/2 in. O.D. (60500 BTU)

$19.03
  • Polymer coating withstands household chemicals, UV rays and salt
  • For indoor and outdoor use with natural gas or liquid propane
  • Leak tested and rated for -40 degrees F to 150 degrees F
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Highlights

  • 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel with corrosion resistant coating
  • Steel fittings included: 1/2 in. FIP and 1/2 in. MIP (tapped 3/8 in. FIP)
  • ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
  • Use with natural and LP (propane) gases
  • 100% leak tested
  • Approved for indoor and outdoor use
  • Temperature rating: -40° to 150° F
  • Pressure rating: 1/2 psi maximum
  • Designed, machined and assembled in the USA
  • CSA certified
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 100193061

Model # CSSD54-48 X

Store SKU # 344982

Specifications

Dimensions: H 48.42 in, W 1.125 in, L 48 in

Dimensions

Inner diameter (in.)

0.375

Outer diameter (in.)

0.5

Product Height (in.)

48.42 in

Product Length (in.)

48 in

Product Width (in.)

1.125 in

Details

Connection type

FIP x MIP

Inner material

Stainless steel

Maximum Pressure (PSI)

0.5

Maximum Working Temperature (F)

150

Minimum working temperature (F)

-40

Outer Material

Stainless steel

Pack Size

1

Returnable

90-Day

Warranty / Certifications

Certifications and Listings

CSA Listed

Manufacturer Warranty

Limited Manufacturer Warranty

Questions & Answers

will this work on GE model JGBS61RPSS?
ByNov 20, 2026
1 Answer | 
Answer This Question

Yes, that appliance has a 1/2" MIP fitting and is rated to 55,000 BTU. This connector has a 1/2" FIP fitting and is rated for 60,00 BTU.

By|Nov 20, 2026


    What flare size are the cable connector sizes
    ByNov 11, 2026
    1 Answer | 
    Answer This Question

    This connector would come with the flare connection adapters which are 1/2" OD flare X 1/2" FIP and 1/2" OD flare X 1/2" MIP. If you require more information, please contact technical support at 877-272-7755. Thanks

    By|Nov 12, 2026


      Can you use tephlon tape on a gas fitting connector
      ByOct 12, 2026
      2 Answers | 
      Answer This Question

      Has to be desnated for gas

      By|Oct 29, 2026

        Yes, you can use the yellow high density plumbers tape on gas fitting connections. If you would like more information please contact technical support at 877-272-7755. Thanks

        By|Oct 13, 2026


          Can this be used to hookup gas logs?
          ByOct 11, 2026
          1 Answer | 
          Answer This Question

          Yes. Our procoat appliance gas connectors can be used on gas logs. We suggest they are installed down and away from the flame and they should not be installed in areas that reach temperatures over 150 degrees Fahrenheit. If you need more information please contact technical support at 877-272-7755. Thanks

          By|Oct 13, 2026


            Can this be used to connect an outdoor natural gas firepit to an outdoor gas line?
            ByJul 12, 2026
            1 Answer | 
            Answer This Question

            Yes, this connector can be used outdoors but the connector cannot be concealed or run through enclosed walls, partitions or panels. When installing in a firepit always install the connector down and away from the flame. If you have any more questions, please contact technical support at 877-272-7755. Thanks

            By|Jul 15, 2026


              Does this require electrical bonding if attached to existing iron pipe and just used to attach the appliance.
              ByMay 16, 2026
              1 Answer | 
              Answer This Question

              Appliance gas connectors generally do not require bonding like CSST piping. I would contact your local mechanical inspector to verify rules in your specific jurisdiction. You can contact technical support if you require more information. 877-272-7755 Thanks

              By|May 18, 2026


                How to cancel an order
                ByOct 8, 2025
                1 Answer | 
                Answer This Question

                You will need to contact Home Depot directly. You can call 1-800-466-3337 for more information. Thanks

                By|Oct 10, 2025


                  Can this be used to connect from a natural gas line outside,to a gas grill ?
                  ByAug 30, 2025
                  1 Answer | 
                  Answer This Question

                  Yes, our appliance gas connectors are certified for indoor and outdoor use.

                  By|Sep 2, 2025


                    Viewing 1-8 of 41

                    Customer Reviews

                    4.7 out of 5

                    • 4.7 out of 573 reviews
                    • 97% recommend this product
                    Filter by:
                    Showing 1-10 of 573 reviews
                    Nice connector but…
                    I purchased this gas line online because it was not available in any local stores, when I opened the package yesterday to connect my new gas dryer, I discovered a strange ring around the yellow tubing that looked like something you see in a key ring. I proceeded with the install but I’: sure if I can trust it for gas leaks. Is this a manufacturing defect by BrassCraft?.
                    by
                      • Recommended
                      1 found this review helpful
                      This customer chose to rate the product and not provide text.
                      by
                      Perfect for our new stove. All the fittings are there , but need to buy the thread tape separately. Otherwise easy peasy.
                      by
                      • Verified Purchase
                      Easy Hook Up With ALL NEW FITTINGS and Long Enough for NEW Water Heater Placement
                      by
                      • Verified Purchase
                      Connection gave me the length I needed.
                      by
                      • Verified Purchase
                      used to connect my new Maytag dryer
                      this was just what I needed to connect my new Maytag dryer to my home natural gas pipe.
                      by
                        • Recommended
                        Needed to replace my gas connector to install a dryer!!
                        I installed a dryer in a house that my friend just moved into, but the gas valve was high so I had to get a longer gas connector. I’m not very knowledgable on parts and sizes, and the gas valve was 1/2” and my dryer was 3/8 so I had to buy a a part to connect to the dryer. It took me a couple of trips to Home Depot to finally figure it out.
                        by
                          • Recommended
                          Recently installed a new Rheem 40 gallon water heater. The dimensions compared with the old tank ...
                          Recently installed a new Rheem 40 gallon water heater. The dimensions compared with the old tank were different. I removed a 42" piece of black iron pipe and used the Brasscraft flexible, stainless steel, connector to connect the gas line. It worked great. Saved cutting and threading a new black iron pipe. The male and female connection couplings made the connection process simple. Great product.
                          by
                          • Verified Purchase
                          • Recommended
                          2 found this review helpful
                          I’m pleased with my purchase,it was exactly what I was looking for. The fit was perfect and easy ...
                          I’m pleased with my purchase,it was exactly what I was looking for. The fit was perfect and easy to assemble. Greatfull!
                          by
                          • Verified Purchase
                          • Recommended
                          Versatile high quality gas line
                          I used this line on my gas dryer It flexes easily but still remains sturdy. There is no "whistling" sound from the line which can be common with other lines. The package came with all necessary adaptors. Do not let the double male fitting fool you. There is a female 3/8 threaded connection INSIDE the 1/2 threaded male side that you screw onto your 3/8 inch appliance.
                          by
                          • Recommended
                          5 found this review helpful
                          Showing 1-10 of 573 reviews

                          Compare Key Features

                          current item

                          Product Snapshot

                          Ideal for indoor/outdoor gas connections, with corrosion-resistant ProCoat™ for lasting durability and safety. CSA certified and leak tested.
                          Ideal for indoor/outdoor gas appliances, with ProCoat™ corrosion, UV, and salt resistance. Leak-tested and CSA certified for safety.
                          Ideal for indoor/outdoor gas appliances, with ProCoat™ corrosion, UV, and salt resistance. CSA certified for added safety.

                          Size/Capacity

                          48 in. L x 0.5 in. OD, 3/8 in. ID
                          1/2 in. I.D. x 5/8 in. O.D. x 72 in. L
                          3/8 in. I.D., 1/2 in. O.D., 72 in. L

                          Pressure Rating

                          0.5 psi maximum
                          0.5 psi
                          0.5 psi

                          Temperature Rating

                          -40° to 150° F
                          -40° to 150°F
                          -40° to 125°F

                          Corrosion Resistance

                          ProCoat™ coating, resistant to chemicals, UV rays, and salt
                          ProCoat™ coating

                          Leak Prevention