
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Calculated Industries Scale Master Classic Professional Digital Plan Measure is an ideal way to measure area and volume take-offs from blueprints, drawings and maps. Featuring 72 built-in scales and 2 built-in memories, the plan measure is useful for building, engineering and landscaping.

Product Width (in.): 1.75 in
Product Width (in.) | 1.75 in |
|---|
Battery Type Required | CR2032 |
|---|---|
Features | Digital, Electronic, Hand-Held |
Hand Tool Type | Measuring Wheel |
Included | Battery(s) |
Number of Batteries Required | 2 |
Package Quantity | 1 |
Returnable | 90-Day |
Manufacturer Warranty | One-year limited warranty |
|---|
Yes, it will read out in decimal inches (e.g., 0.02") and has a 1:1 "rolling ruler" mode, but we would not recommend using it at that fine of resolution as a measuring device. Remember, this is an estimating device. Read specs below: Resolution/Accuracy: 0.025 Inch/99.75% Note: Based on start/stop point and scale magnitude, users typically experience ± 2% - 3% rolling error.
The Scale Master Classic, Pro and Pro XE have the ability to allow you to set or roll a custom scale from your plans that are not to scale. It will not do it automatically you have to set it up.
No our Scale Master Classic was designed to use on Blue Prints measuring in Imperial (Feet, Inches, yard) or Metric (cm, mm, m)
If you have the 3.2 version you need two CR-2032 batteries
Anybody can use the Scale Master Classic, no user account needed...
Yes, In Architectural Mode, there is a 1/32 scale on the Calculated Industries ScaleMaster Classic
Our scales only measure down to decimal inches not fractional
Yes, it shows in the Specification pdf under the "Info & Guides" heading that it will measure 3/16".
Yes
1/4 Inch = 1 foot is a scale in the ARCH mode. If you are referring to 1/4 inch measurements our Scales only read in decimal measurement.
Viewing 1-8 of 12
4.5 out of 5