Standard Water Pitcher Replacement Water Filters, BPA Free (3-Pack)

Frankie, thanks for asking this about our Ultramax Dispenser. Be sure to remove the filter from the reservoir. Handwash your system, lid, and reservoir with a mild detergent and rinse them well. Don't put your dispenser in the dishwasher or use abrasive cleaners, as our pitchers aren't dishwasher safe. To remove the reservoir, use 2 hands to pull the it up from the body evenly on all sides. If you have any further questions, call us at 800-242-7482. Have a hydrated day. Jeffery from The Brita Team

Thanks for the chance to shed some light on your inquiry, Vivian. Our Standard Filter OB03 will fit your Slim Pitcher perfectly. We’re grateful for your question, and we’re here to assist you at 800-242-7482. Please have reference number 231122-000477 available when you give us a call. We hope to speak with you soon. Shannon from The Brita Team

Thank you for contacting us at Brita, and we’re happy to answer your question about using our Advanced Filter with non-Brita Pitchers. We can't guarantee that they'd fit properly because the reservoirs in our pitchers are designed specifically for Brita filters and haven't been tested with competitive products. We hope this helps. If you have any additional questions, please give us a call at 800-242-7482 with reference number 230626-000496. Thanks again. Alexandrea from The Brita Team

Hello, and thank you for your interest in our Brita Standard Filters. We'll be more than happy to answer this for you. If you would, please give us a call at 800-242-7482 and mention reference number 210106-000344. We look forward to assisting you. Monique from The Brita Team

Yes, they fit older and new models.

I believe they work on all Brita pitchers.

Hello. Thank you for sharing your question with us. The model number of our Longlast filter is OB06. We hope this helps. Jade from the Brita team

If you go to brita.com you will see list of contaminants that their filter removes. I don't know for sure but PFAS and PFOA are not removed.

The Brita Filters out heavy metals, copper, mercury, cadmium, chlorine, taste and odor. Its certified against NSF/ANSI Standards 42 and 53 and is not intended to purify water, just make it better. Its not to be used for microbiologically unsafe water.

This is Brita's standard filter and is designed for better tasting water by reducing chlorine. Water does taste much better. The filter reduces zinc, mercury, copper and cadmium. It does not state that it reduces teflon.

Heavy Metals, Taste and Odor, Metallic Taste, Copper, Mercury, Cadmium, Chlorine and Zinc.

The box shows it meeting NSF/ANSI Standards 42 and 53. I recommend you look up those standards to be sure if PFAS and PFOA are filtered. The list on the box identifies chemicals removed as copper, mercury, cadmium, chlorine, and zinc. The box specifically reports that fluoride added to water supply is not removed.

you may not have it in correctly, they will go in two ways but only one way will drop down and fit snuggly. Try taking it out and turning it 1/4 turn and put it back in. I had the same problem but I did that and it fit right. Good luck!

You probably aren’t installing it properly. There’s a long indentation on filter and that goes in the back of unit. Should drop right in without pushing on it.

Make sure the filter is on the key and press snugly, so that the filter is only getting water through the top and nothing is going down the sides of the filter.

Did you rinse it for 15 seconds and push it down in the reservoir firmly? Did you discard the first 3 pictures?

Are you sure you've inserted it so that larger groove in the filter aligns with the opening that has an extension? The extension looks a little bit like a dorsal fin.

Petrottaj, thank you for your recent inquiry with The Home Depot. the replacement filter is item number 205996425. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

#1000-025-929