
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
For over 25 years, Ram Board has been the go-to for heavy-duty jobsite floor protection. Engineered to withstand the toughest conditions, Ram Board features Spill Guard Technology for superior liquid resistance, Vapor-Cure Technology to let floors breathe, and Wall-Guard Technology for vertical surface coverage. It's reusable, reliable, and pairs perfectly with Seam Tape for secure seams and Edge Tape to hold firm. When it comes to jobsite protection, Ram Board has you covered.
Drop Cloth Length (ft.) | 50 |
|---|---|
Drop Cloth Length (ft.) x Drop Cloth Width (ft.) | 50 ft. x 3 ft. |
Drop Cloth Width (ft.) | 3 |
Thickness (mil) | 42 MIL |
Color Family | Brown / Tan |
|---|---|
Drop Cloth Material | Paper |
Features | Water Resistant |
Kit | No |
Package Quantity | 1 |
Paint Tool Product Type | Temporary Floor Protection |
Returnable | 90-Day |
Ram Board is designed as a heavy-duty, temporary floor protection board for jobsites. While it features Spill Guard Technology for liquid resistance and is considered water resistant, it is not intended for prolonged use in consistently damp or non-weather-controlled environments, such as under a shower. The manufacturer advises against such use, as it may degrade over time due to dampness, and the ink could potentially bleed. It is also not designed to be used as a permanent subfloor or as a base for attaching other materials.
Ram Board is designed as a heavy-duty, temporary floor protection board for jobsites, protecting surfaces from dust, dirt, and paint splatters. It features Spill Guard Technology for liquid resistance and Vapor-Cure Technology to allow floors to breathe. However, it is not intended to be used as a permanent subfloor or as a base for attaching vinyl tiles. The manufacturer does not recommend using this product in non-weather-controlled environments for prolonged periods, as it may degrade over time due to dampness, and the ink could potentially bleed. Attaching vinyl tiles would require a stable, permanent subfloor that can properly bond with adhesives, which Ram Board is not designed to provide. Its primary purpose is temporary surface protection during construction or renovation.
The thickness of the Ram Board is stated in the product specifications as 0.04 MIL. A "mil" is a unit of measurement equal to one-thousandth of an inch (0.001 inches). Therefore, 0.04 MIL is equivalent to 0.00004 inches.
We setup ladders and work tables over this all the time. I recommend taping all sides to help limit it sliding out from under you
Yes, you can generally use a step ladder on Ram Board. Ram Board is designed as a heavy-duty temporary floor protection board, engineered to withstand tough jobsite conditions and protect surfaces from dust, dirt, and paint splatters. It is 5x thicker than builder's paper and provides robust protection. However, for very heavy loads or prolonged use in a single spot, especially on softer flooring underneath, it's always a good practice to consider placing additional padding or a wider base under the ladder feet to further distribute the weight and prevent potential indentations on the protected surface.
Yes, Ram Board is suitable for moving furniture over. It is designed as a heavy-duty temporary floor protection board, engineered to withstand tough jobsite conditions and protect surfaces from dust, dirt, and paint splatters. It is 5x thicker than builder's paper and provides robust protection for various flooring types, including hardwoods, tile, vinyl composition tile (VCT), concrete, epoxy, and linoleum. For very heavy furniture or items with sharp edges, it is always a good practice to use furniture sliders or lift the items to minimize direct dragging, even with Ram Board in place, to ensure optimal protection for both the board and the underlying floor.
Yes, Ram Board is suitable for protecting tile floors during a small construction job, such as removing old mirrors. It is designed as a heavy-duty temporary floor protection board, engineered to withstand tough jobsite conditions.
No, this is too rigid. I would recommend getting stego wrap and overlapping seems 4" and taping all joints.
There are 16 rolls per pallet.
Viewing 1-8 of 72
4.7 out of 5