Top Rated

Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
The Kidde i9010 is a 10-year, sealed battery operated smoke alarm featuring Hush, Alarm Memory, and a self-activation mechanism that makes installation simple and easy. This package contains 3 Kidde 10 Year Lithium battery alarms in convenient, easy to open box.The alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches--everything is automatic. The sealed-in board-mounted battery will power the i9010 unit for its complete 10-year life. No replacement battery will ever be needed, and an End of Life alert indicates when it is time to replace the alarm.At the end of the alarm's 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the alarm and renders the battery safe for disposal. As an added safety mechanism, the alarm lockout feature prevents a deactivated unit from being mounted back on the mounting bracket.The i9010 also features Hush technology, allowing consumers to temporarily silence nuisance alarms, and an Alarm Memory feature that alerts the user via rapidly flashing LED lights if the alarm has sounded since the last time the test/reset button was used.This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires).
Product Depth (in.) | 1.55 in |
|---|---|
Product Width (in.) | 5.6 in |
Alarm Sensor Type | Ionization |
|---|---|
Alarm/Detector Features | 10-Year Battery, Hush Button, Tamper Resistant |
Alert Type | Siren |
Battery Type Required | Built-In |
Commercial/Residential | Home |
Included | Batteries |
Pack Size | 3 |
Power Source | Battery |
Returnable | 90-Day |
Voltage (V) | 120 V |
Certifications and Listings | UL Listed |
|---|
Hello. No, these alarms do not interconnect or communicate with each other. If one alarm goes off, it does not set off the other alarms so you can't stop the alarms by finding the alarm setting off all of the others.
Hello. Yes but the plastic could be brittle at this point. Replacing the bracket would just take a screwdriver and would be recommended.
Hello. Yes. It is a sealed 10 year battery backup.
Yes
Hello. No, this unit is not hardwired and does not plug in. Call us with the old unit in hand at 1-800-880-6788 and we can tell you which alarms can easily replace the old one.
Hello. No. It does not run on AC power at all. As a smoke detector, it has to go on the ceiling or, if you have a flat unsloped ceiling, on the wall within a foot of the ceiling. See the owner's manual for the I9010 to see where this alarm should be located on the ceiling or wall and in what rooms.
I need to find the same male female connection for the model GN -503
Hello. No, the bracket attaches with two screws and the alarm rotates and screws into the bracket.
It has a special bracket that arms the detector when twisted into it. You will need to use its bracket.
Hello. No, this alarm is not hardwired and does not have the same bracket.
Yes. It is a bracket with screws to fasten it to the ceiling. It must be used because it activates the detector.
Hello. Yes, it comes with a mounting bracket that is installed with screws and anchors on the ceiling or, if you have a an unsloped flat ceiling, on the wall within a foot of the ceiling.
Viewing 1-8 of 282
4.4 out of 5