- Use on hand-held and table-mounted portable routers
- Cuts all composition materials, plywood, hardwood & softwood
- TiCo Hi-Density Carbide for flawless finishes and longer life
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase.
Ask about this product
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Product Details
About This Product
Diablo's Rounding over Router Bits soften furniture edges and creates decorative beads. With interchangeable bearings to cut rabbets of different depths, Featuring TiCo carbide with titanium, these bits provide a long cutting life and ultra-fine finish. Perma-shield, Diablo's high performance coating, reduces friction and build-up on the bits. The bits kick-back reducing design allows for safer, more controlled cuts. These bits are computer balanced for a smooth and accurate cut. All Diablo router bits feature exceptional quality, unmatched precision and maximum cutting life.
Highlights
- For beading work, equip bits with a 1/8 in. bearing and step washer
- Cuts all composition materials, plywood's hardwoods and softwoods
- Use on hand-held and table-mounted portable routers
- Red router bits are a registered trademark of Freud America, Inc.
- Return Policy
Product Information
Additional Resources
Shop All DIABLOSpecifications
Dimensions: H 4.63 in, W 3.88 in, L 2.875 in
Dimensions
Cut Diameter (in.) | 1.875 in |
|---|---|
Product Height (in.) | 4.63 in |
Product Length (in.) | 2.875 in |
Product Width (in.) | 3.88 in |
Shank Diameter (inch) | 1/2 inch |
Details
Individual/Set | Individual |
|---|---|
Number of Pieces | 1 |
Returnable | 90-Day |
Router/planer type | Cabinet |
Tools Product Type | Power Tool |
Questions & Answers
What is the outside diameter of the bearing on the 1/8” radius bit?
Can this bit be used on porcelain?
This is described as a 1-7/8" radius rounding bit, but the photos show 5/8" radius. Please verify the actual radius of this bit.
The cut radius of this router bit is 1.875 inches, or 1-7/8 inches.
I'm planning on pouring epoxy on my laminate countertops and the company recommends rounding off the edges to allow the epoxy to flow over the edges easier. Can I cut right through the laminate with this?
It sure will, Angie. Thanks for the terrific question!
It could if you wanna pay too much money for a router bit.
Yes you can. Make sure the router is set to the correct speed and go at a consistent speed to prevent tear out or buring.
Depends upon what type of laminate your countertops are made of. Since it is a carbide bit it probably will work on most types.
can it used with a hand held router?
Hi Ozzy! The DR34128 can be used in a handheld router as long as the throat of the router base is large enough to accommodate the bit’s 2” diameter. Since this bit removes a large amount of material, always be sure to use multiple passes to reach the full profile.
Hello Ozzy, Thank you for your question. You can use this bit in a hand help router. You want to make sure that it will take a 1/2" shank and have a large enough motor to handle this bit. You might also want/need to make a couple passes to get a nice smooth corner.
Viewing 1-5 of 5
Customer Reviews
4.7 out of 5
