Mini Torx Dual Material Screwdriver Set (12-Piece)

Great tools as always from Gearwrench. I've had these drivers for about 2 weeks and they fit every torx nut I've encountered. Comfortable feel and durable.

This is a really nice set of tools. The Handles are of a kind of soft grippy material that is easy to hold and turn. The top of the handle will rotate so that you can put a hand or finger on the top and apply pressure and then turn with the lower portion of the handle. The tips seem to be made of a nice hard steel that doesn't want to strip or round off easily. I would have liked a little texture on the part of the handle that you grip, but it works fine the way it is. You get T5,T6,T7,T8,T9,T10 Torx Drivers, #00,#0,#1 Philips Screwdrivers, and 1.5mm, 2.0mm, 2.5mm Flat Screwdrivers. It comes with a case, but the case could be smaller and easier to use, it is pretty hard to get the Screwdrivers back into the elastic loops. The actual tools I rated 5 stars, but I would only give the case a 2 star rating. The tools overall are about 6 1/4 inches long the handles are about 3 3/4" long and about 3/4" in diameter, the shanks about 2 1/2 inches. All in all a really nice set of tools with a so-so case.

Among the very nice features of this set is that the handles are big enough for comfortable and precise use. Many sets with the small size ends have small handles that make holding the tool and turning the tool difficult. With small tips it is important to keep the tip properly positioned, properly loaded, and with carefully controlled torque. Those aspects of proper use are easy with the nicely sized handles on this set, a substantial improvement over the other sets that I have with much smaller handles. The tips of the tools are very precise and nicely finished. A very nice set.

This is an excellent set of 12 small standard (3), phillips (3), and torx (6) screwdrivers. I have collected several different types of small screwdrivers over the years because I've never had a single set that had all three types in different sizes--until now. The (relatively) 'full size' handles of these screwdrivers is really nice and makes them much easier to use than the small metal handled 'jeweler' screwdriver kit that I've used for years. And I specifically like that these include torx. My other mini screwdrivers were only standard/flathead and phillips, so I've previously used a cheap screwdriver kit that had a few poor quality torx bits. It has 5 torx screwdrivers: T5 through T10. So great for electronics and smaller devices. Each screwdriver handle is clearly labeled with the tip style and size, and each type as a different color cap on the end of the handle. The caps on the end of the handle rotate, helping with one-handed use of the screwdrivers. The screwdrivers also have a black oxide tip and a slightly grippy overmolded black rubber on the handle. The set comes with a carrying case, which is nice, but the downside is that the case is relatively large (11.5 x 6.5 x 1.25), so I don't have room for it in the dedicated screwdriver drawer in my toolbox. I will likely remove the screwdrivers from the case so that I can store them in my toolbox. Now that I have this kit, I can probably get rid of 10 different random mini screwdrivers that I've collected over the years. This is a great high quality mini screwdriver kit.

This is a pretty complete set of mini screwdrivers. There are 3 flat and 3 Philips head screwdrivers and 6 tori screwdrivers (T5 through T10). The end caps spin making them easier to use and the caps are color coded to the type of screwdriver. The sized are labelled on the sides of the handles, through I wish they were also on the top of the caps. I've gone through many mini torx screwdrivers in the paste because the tips are often too soft. In terms of hardness/durability, I would give these a 7-8 out of 10. They've held up better than others I've had when removing tight/stubborn screws, but they have already showed some signs of wear with only a couple of uses (see pics).

A great set of MINI-screwdrivers. The mini set has T5, T6, T7, T8, T9, T10 and mini 3 Philips, 00, 0, #1 and 3 slotted; 1.5, 2, 2.5mm. Easy one hand use with end swivel. Handles are small, especially for large hands. The tips are very nice and well-shaped. The oxide tips are well coated and provide friction. Handles are color coded for blade shapes. They have printed makings for identifying which tip. The drivers come in a designed pouch and are easy packed in my tool box. Long blade drivers, not included, are also available.

GearWrench Mini Torx Dual Material Screwdriver Set (12-Piece) GearWrench puts together a great Mini Torx Screwdriver set in all one place. Enclosed in a nice zippered bag, the drivers are all organized, easy for you to find. The set includes: Mini Screw Drivers: 1.5, 2.0, 2.5mm, #00, #0, and #1 Mini Torx Drivers: T5, T6, T7, T8, T9, and T10 The heads are black oxide, non slip. There is a section of the handle with grooves for strength application. The handle's main part is made for comfort. The cap color shows what type the driver is, and it rotates so that you can handle the driver easier when tightening or loosening your screw. The set is made in Tiawan and comes with a limited lifetime warranty. I really like the set. Well made. Good construction. Feels good in hands. Ambidextrous. I highly recommend this set, good for small projects, electronics, hobbies, and more. I rate this set 5*s out of 5. Thank you GearWrench for allowing me to try your product. Thank you Home Depot for offering this item to me.

The GearWrench Mini Torx Dual Material Screwdriver Set (12-Piece) has the most needed mini screwdrivers I use in my workshop. With six mini Torx, three mini slotted and three mini philips screwdrivers, I can get to smaller and deeper installed screws than with my regular screwdriver sets. The handle tops have a rotating head so that I can apply torque with my fingers and pressure with the palm to the screw head, all in one easy hand motion. Well designed and solid construction, this set is a welcomed and useful addition to my hand tool arsenal!

Great selection of small bits / drivers in a zippered carry case. Got this to work on computers, mostly for the Torx drivers, but have many other uses where small screws are used. The caps free spin for finger pressure and are color coded to type. Set includes: 1.5, 2, 2.5 mm - Flat blade drivers (Orange tops) 00, 0, 1 - Phillips drivers (Black tops) 5, 6, 7, 8, 9, 10 - Torx drivers (Grey tops) All contained in zippered case about 11" X 6" X 1". The drivers are secured by elastic, well marked and easy to identify in the carry case.

For many years I have had sets of small screw drivers - sometimes called jewelers tools that usually come in sets of six, three flat head and three Phillips head. They worked well, but over time the heads would wear, I grew older and handling narrow screwdrivers became a pain. Plus some devices now use other types of screw heads requiring a variety of tools to open battery compartments. This set contains sis screwdrivers ranging from 1.5mm to #1. Also has mini Torx T5-T10. Sizes written on handles. I particularly like the longer and wider handles. Comes in a soft back case, so not sure if that will hold up for many years, but a nice addition to my toolkit.