#1 Home Improvement Retailer

Internet # 204845572

Model # 0110000

Store SKU # 1000517907

Product Images

15.5 cu. in. Retrofit Ceiling Fan Saf-T-Brace

$26.20
Apply Now
Pay $1.20 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card
  • Install a ceiling fan or fixture without accessing attic space
  • Install into finished ceilings with just a 4 in. hole
  • Coordinates with all ceiling fans
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

This Westinghouse Saf-T-Brace allows you to safely install your ceiling fan or lighting fixture in three easy steps--without having to access attic space. Ideal for installation during new construction or remodeling, this mounting brace can be put into finished ceilings through a 4-in. hole. This brace works with ceiling fans up to 70 lbs. The brace's three teeth easily twist and lock into the ceiling joists and its square tube allows for easy turning. For added ease, the 15-1/2 cu. in., 1-1/2 in. deep electrical box can be positioned anywhere on the brace to fit your project needs. The brace works with existing ceiling joists between 16 and 24 in. wide. The Saf-T-Brace comes with everything you need for installation, including easy-to-follow instructions. It also includes a Saf-T-Cap to protect bolts and wires during drywall installation and painting. The brace is UL/CUL listed to support light fixtures up to 150 lbs. on 16 in. centers and 50 lbs. on 24 in. centers. It supports fans up to 70 lbs. Product reference number 01100.

Highlights

  • UL/CUL listed to support lighting fixtures 150 lbs. or less on 16 in. centers and 50 lbs. or less on 24 in. centers; supports fans 70 lbs. or less
  • Safely hang a ceiling fan or lighting fixture during new construction or remodeling without going into the attic
  • Includes Saf-T-Cap to protect bolts and wires and all hardware, including easy-to-follow instructions.
  • 15-1/2 cubic in., 1-1/2 in. deep, electrical box; 6 knockouts for conduit or Romex connections; includes 1 Romex connector
  • Note: Product may vary by store
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 204845572

Model # 0110000

Store SKU # 1000517907

Specifications

Dimensions

Product Depth (in.)

1.5 in

Product Height (in)

2.25

Product Width (in.)

24 in

Details

Application

Ceiling

Box Type

Ceiling Fan

Color Family

Silver

Indoor/Outdoor

Indoor

Knockout/Hole Size (in.)

7/8

Material

Steel

Metallic/Non-Metallic

Metallic

NEMA Configuration

Not NEMA Rated

Number of Knockouts/Holes

6

Pack Size

1

Returnable

90-Day

Shape

Octagon

Warranty / Certifications

Certifications and Listings

UL Listed

Manufacturer Warranty

N/A

Questions & Answers

Joists are not quite 16 inches on center. Will this adjust to 15.5 inches
ByJun 10, 2026
1 Answer | 
Answer This Question

Yes - it can be adjusted down to 14.5 inches.

By|Jun 15, 2026


    How do I center the safety bar over the hole?
    ByJun 12, 2024
    1 Answer | 
    Answer This Question

    Thank you for your question. Our 01100000 Saf-T-Brace includes installation instructions. If you are uncertain how to install it or if this will work for your application, we recommend contacting a local electrician for assistance.

    By|Sep 1, 2024

      (1)

      How do I remove existing outlet box which is not attached to joists
      ByApr 3, 2024
      1 Answer | 
      Answer This Question

      Thank you for your question. Regarding your question, you will need to contact a local electrician for assistance with this question and also to make sure you are following the building code in your area.

      By|Apr 4, 2024


        Can I use on 5/8” drywall ceiling?
        ByDec 29, 2023
        1 Answer | 
        Answer This Question

        Thank you for your question. Our 0110000 ceiling fan Saf-T-Brace is designed for 1/2" drywall.

        By|Dec 29, 2023


          Will it fir between joists that are 15 clear inside of joist
          ByOct 5, 2023
          1 Answer | 
          Answer This Question

          Thank you for your question. Our 0110000 Saf-T-Brace is for use with 16" to 24" ceiling joists.

          By|Oct 31, 2023

            (1)

            How does this brace work if you have furring strips between the beams and the ceiling sheet rock?
            BySep 9, 2023
            1 Answer | 
            Answer This Question

            Thank you for your question. Please email the Westinghouse Lighting Consumer Support Division for assistance at consumersupport@westinghouselighting.com and provide all of your information and details so we can best assist you.

            By|Sep 13, 2023


              What size hole do I need to drill into the ceiling?
              ByJul 4, 2023
              1 Answer | 
              Answer This Question

              Thank you for your question. Please follow the instructions for the Saf-T-Brace, item 0110000 instructions. If you are unfamiliar with installing this product, we recommend contacting a local electrician for assistance.

              By|Jul 5, 2023


                Will this box support a 32 pound ceiling fan?
                ByMar 8, 2023
                1 Answer | 
                Answer This Question

                Thank you for your question. Our 0110000-ceiling fan Saf-t-Brace supports fans up to 70 pounds when installed according to the included instructions.

                By|Oct 14, 2023

                  (2)

                  Viewing 1-8 of 60

                  Customer Reviews

                  4.6 out of 5

                  • 4.6 out of 185 reviews
                  • 90% recommend this product
                  Filter by:
                  Showing 1-10 of 185 reviews
                  We purchased a Chandelier fan and we used this to installation. This was perfect for our needs and the fan was installed nicely. Good product!
                  by
                  This box installed easily and securely to provide a stable platform for our new ceiling fan. We d...
                  This box installed easily and securely to provide a stable platform for our new ceiling fan. We didn't have to access the attic to install the box, but we did have to get up there to remove the old box which was nailed in place. Make sure you rotate the support bar in the correct direction, or it'll move out of your reach as it extends.
                  by
                  • Verified Purchase
                  • Recommended
                  This product is great for working on the first floor of a two-story house. When you're removing a...
                  This product is great for working on the first floor of a two-story house. When you're removing an existing ceiling light and want to add a ceiling fan or I have your fixture this is the product you need. All I had to do was removed the fixture remove then remove the Box cut the old bracket out of the way. Slide the new bracket into place turn the mounting bracket to tighten it up against the studs. Installed a new box, install the wiring and hang my ceiling fan and the job is done. I'd recommend this box can anybody unless to hang a ceiling fan or fixture.
                  by
                  • Verified Purchase
                  • Recommended
                  1 found this review helpful
                  Works great! Wish I found this years ago. All you do is cut a 4" hole, slide the bracket up there...
                  Works great! Wish I found this years ago. All you do is cut a 4" hole, slide the bracket up there, center it and twist until it's tight, install the hanging connector, screw in the box and you're done. The trick is to make sure the bracket is centered to the hole and also don't wire through the knock outs that are near the connector screws (you won't have room to screw on the nut). The box spacing to the drywall opening is perfect which allows for a seamless fixture install to the ceiling.
                  by
                  • Recommended
                  7 found this review helpful
                  I wanted to replace the light fixture in one of our bedrooms with a ceiling fan, but once I had t...
                  I wanted to replace the light fixture in one of our bedrooms with a ceiling fan, but once I had the old fixture removed, I quickly realized the existing electrical box was not rated to support a fan and we needed a replacement. The location of the ceiling joists made the 15.5 cu. in. Retrofit Ceiling Fan Saf-T-Brace just the right product to solve this problem. Installation is a breeze as you simply pass the brace through the hole in the sheetrock, rest it on the sheetrock between the joists, and hand rotate the tube until the teeth lock firmly into each joist. (Ensure that the square end of the tube is over your hole and NOT the expandable side with the screw) You then rest a small bracket over the tube and center over the hole. Next, punch out one of the holes in electrical box, mount it to the bracket, and you’re done! The only reason I’m rating this product 4 stars instead of 5 is that one of the included bolts was slightly damaged out of the box, but I had another on hand to replace it. Note: You do not need to have attic access for installation; however, since I do have access, I snapped a couple pictures and verified the installation from that perspective.
                  by
                    • Recommended
                    19 found this review helpful
                    When my ceiling fan sagged on one side I took it down to discover the plastic junction box to whi...
                    When my ceiling fan sagged on one side I took it down to discover the plastic junction box to which it was affixed had cracked and a piece broken off. I saw this product and was a bit intimidated but I did want to fix the fan and not have to go into the attic etc.. Well I bought it and found it to be exactly as advertised and relatively easy to install. The hardest part was getting the wiring and old junction box out of the ceiling without totally destroying the ceiling around the box. I marked the wires and took photos so that I would know which wire went where. Did the install and rehung the fan in about two hours, start to finish. I would recommend this to anyone who has a bit of experience with electricity and basic tools.
                    by
                      • Recommended
                      3 found this review helpful
                      Works, but needs improvement
                      First - there are two versions of this product - one made by Westinghouse and one made by Commerical Electric. Both have similar packaging. I bought this at my local HD and it was the Commerical electric version. DO NOT BUY this unless you need to do your remodel asap. There are better products on the market and if you can find the Westinghouse version, it is better. The biggest problem with this device - attaching the junction box to the cross member via the small brace is virtually impossible with the screws provided. Do yourself a favor and buy 3 inch screws. On my first install with this product I ended up taping the brace to the cross member and then have 90 minutes of swear words I finally got the junction box secured to the cross member. I vowed to never use this product again. Fast-forward two weeks and the wife wants a light hung asap for a party (we are in the middle of a remodel). I bought this same product from HD in town and luckily, this time I had a small access panel to my attic so I set a brick on top of the brace to hold it down and get the screws in. Once mounted, this product performs great and my fans have zero wobble. But with some small modifications this would be a much better product.
                      by
                      • DIY
                      22 found this review helpful
                      Works as ecpected.
                      This works as advertised. I highly recommend this product
                      by
                      • DIY
                      • Recommended
                      4 found this review helpful
                      I had researched different products for installing this for a ceiling fan installation in an uninsulated ceiling joist space with no access from above. This is the one I felt could provide strong attachment to both joists while the flat edges of the shape of the bar allowed easy tightening with adjustable wrench as needed. I would recommend to tighten just enough to secure a solid installation - over tightening is not recommended and not necessary. This is a very strong brace and if the ceiling joists aren’t strapped, u might cause drywall screws to pop a bit and become more visible if u put more than necessary force by over tightening brace.
                      by
                      • Verified Purchase
                      T-brace
                      Perfect condition / functionality.
                      by
                      • Verified Purchase
                      • Recommended
                      Showing 1-10 of 185 reviews

                      Compare Key Features

                      current item

                      Product Snapshot

                      Ideal for new construction or remodeling, this ceiling fan brace supports fans up to 70 lbs. and features a 15.5 cu. in. electrical box for easy installation.
                      Ideal for new construction projects, this ceiling fan brace supports fans up to 70 lbs. and includes a metal cover for added protection.
                      Ideal for new construction or remodels , this ceiling fan brace allows for safe and easy installation without attic access . Supports fans up to 70 lbs . and includes all necessary hardware ..
                      Ideal for homeowners looking for in-wall AV and wiring storage, making home theater setup easier.

                      Capacity

                      15-1/2 cubic in.
                      15.3 cu. in.
                      21.5 cu. in.

                      Dimensions

                      H 2.25 in. x W 24 in. x D 1.5 in.
                      15.1 in D x 4.0 in W x 2.5 in H
                      H: 3.3 in, W: 4 in, D: 13.3 in
                      14.4 in. W x 9.3 in. H x 3.9 in. D

                      Fire Resistance

                      Weatherproof

                      Number of Gangs

                      2