#1 Home Improvement Retailer

Internet # 204940168

Model # 3158

Product Images

Exclusive

1/2 in. x 2 ft. x 2 ft. PureBond Pre-Primed Poplar Plywood Project Panel (Free Custom Cut Available)

$15.96
  • Free custom cut available - See details below
  • Poplar plywood strength, performance and durability
  • Primed poplar veneer on both sides of plywood
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

For DIYers and professional tradesmen who recognize the importance of going green and using natural timber harvested in a responsible manner, turn to this PureBond Pre-Primed Poplar Plywood from Columbia Forest Products. Each 5-ply sheet features pre-primed poplar face, which exhibits the warmth and beauty of natural hardwood to supply your carpentry creations with visual allure. Furthermore, the 1/2 in. x 2 ft. x 2 ft. panels are manufactured with a soy-based PureBond technology that is formaldehyde-free so it wont deteriorate air quality, as is common with UF-constructed sheets that are susceptible to releasing airborne contaminants over time. Intended for interior use, these pre-primed poplar plywood panels are an affordable way to craft authentic hardwood-faced masterpieces such as built-in cabinets, entertainment centers, tables, shelves, headboards, wall panels and more. With an eye toward sustainability, Columbia Forest Products takes pride in manufacturing this Earth-conscious product and takes seriously its responsibility in replenishing forests for future generations.

Highlights

  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • 5-ply project panel is assembled with decorative poplar veneer
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top and bottom veneers exhibit the warmth, beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/2 in. x 2 ft. x 2 ft.; Actual: 0.453 in. x 24 in. x 24 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 6 lbs.
  • Grade: B-2 - See Grading Guide for additional information
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 204940168

Model # 3158

Specifications

Dimensions

Actual Product Length (in.)

24.000 in

Actual Product Thickness (in.)

0.403 in

Actual Product Width (in.)

24 in

Nominal Product Length (ft.)

2

Nominal Product Thickness (in.)

1/2

Nominal Product Width (ft.)

2

Details

Exposure Durability

Interior

Pack Size

1

Plywood Features

Paintable, Sanded, Stainable

Plywood Product Type

Project Panels

Project Panel Type

Hardwood Plywood

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Product warranted against glue or bond failure. Product replacement provided.

Questions & Answers

Is this thick enough to build a big drawer box? I notice it shows only .40
ByMar 9, 2026
1 Answer | 
Answer This Question

The average actual thickness is 0.453 in., that is on the lower end of the allowable range for the category, but it can vary some by panel - Michael

By|Oct 16, 2026

    (1)

    What is the weight of a 4' x 4' piece?
    ByMar 5, 2026
    1 Answer | 
    Answer This Question

    Approximately 44 lbs.

    By|Mar 6, 2026


      Are the primed surfaces sanded and primed smooth enough to where the grain is no longer visible and it can be painted over with cabinet paint. I don't want any visible wood grain on my cabinets exterior walls.
      ByMar 16, 2024
      1 Answer | 
      Answer This Question

      Hi, Yes, we will sand the wood to a smooth finish before applying the primer.

      By|Mar 18, 2024


        How precise are your cuts?
        BySep 15, 2023
        1 Answer | 
        Answer This Question

        Hi, We will follow and cut the exact dimensions you are wanting. If the cuts do exceed the limit, then we will spread the kerf due to our saw blade, but yes, we will cut make the exact cuts you request.

        By|Sep 21, 2023

          (1)

          Hi, can you cut me three 18 5/8 X 29 1/2 from 2 ft X 8 ft sheet. Is it white in color?
          ByJan 10, 2023
          1 Answer | 
          Answer This Question

          Hello, Yes, we could get 3 parts from the panel that are 18 5/8" x 29 1/2". You would need to complete the custom cut form on the product page. It can be located under product details and then place the order for the panel.

          By|Jan 11, 2023


            Hi, is it white in color? If I buy one 2 ft X 8 ft, can you cut me three 18 5/8 inch X 19 1/2 panels? I need them to use them as shelf to put some cloth.
            ByJan 9, 2023
            1 Answer | 
            Answer This Question

            Hello, Yes, we could get 3 parts from the panel that are 18 5/8" x 29 1/2". You would need to complete the custom cut form on the product page. It can be located under product details and then place the order for the panel. It is a "lightly" white colored panel. Not a heavy paint coat.

            By|Jan 11, 2023


              It says that free custom cut available. I need a custom shape with specific dimensions. How do we order that online?
              ByDec 27, 2022
              1 Answer | 
              Answer This Question

              Hello, We can only offer the square cuts currently.

              By|Dec 28, 2022


                can you use it for exterior shutters
                ByNov 19, 2018
                3 Answers | 
                Answer This Question

                Hello ciskoe, I wouldn't recommend using untreated plywood for an exterior application. You would likely suffer de-laminating of the ply layers over time. Build the shutters from solid wooden boards instead and thoroughly prime and paint or exterior stain the finished shutter. I hope this helps. Cheers, Chris

                By|Nov 19, 2018

                No, this product is recommended for indoor use only.

                By|Nov 20, 2018

                  This plywood is meant for interior use only. The glue is water-resistant, but not waterproof and would not hold up well in an exterior application.

                  By|Nov 20, 2018


                    Viewing 1-8 of 14

                    Customer Reviews

                    4.6 out of 5

                    • 4.6 out of 49 reviews
                    • 90% recommend this product
                    Filter by:
                    Showing 1-10 of 49 reviews
                    I ordered 2 of the 24x24 inch boards with delivery to my home. The delivery was quick however the backside of one of the boards had some damage to the corners. Luckily both sides of the board were primed so I turned it over to use the good side. Since the boards were primed it allowed me to get to painting quicker. They are lightly primed so you can still see the wood grain.
                    by
                    Good for painted projects, but not ready-to-display
                    This plywood was dead flat, even after leaning at an odd angle against my workbench for over a week. The surface is continuous and free of positive material. The primer appears to have filled the knots, but it does not hide them. I didn't paint the project I used them for, but it looks like this primer would go a long way to keeping the oil from the knots bleeding through, requiring less paint, which would save time and money on larger projects.
                    by
                    • Recommended
                    1 found this review helpful
                    Handy size
                    This panel is a handy size to work for smaller projects. I had a project where I needed to construct a sidewall to support several large, thin boxes of equipment. (A bookend so to speak). The panel was just the right size. I did not have to cut it at all. And because it was primed, it saved lots of time because it was ready to paint. Please note that while the plywood is primed on both sides, the edges are not primed. Also note that the primer is not necessarily a sealer, so there were a couple of wood knots that showed through the primer a bit. Have some primer available to do the edges and knots if needed. If you cut the panel, that cut edge will need to be primed anyway.
                    by
                    • Recommended
                    7 found this review helpful
                    Really Nice
                    This poplar primed panel is simply outstanding!! The panel was well packaged and arrived in perfect condition. While I normally expect a few end voids even in really nice plywood I was unable to find any on this piece. I have never seen a four foot piece of ply that was any flatter than this or any nicer. I would feel comfortable using this for almost any project. This piece come pre-primed so very little prep is required for paining. I can not imagine you being unhappy with this. Pros: Flat Beautiful No end voids Cons: None
                    by
                    • Recommended
                    1 found this review helpful
                    Bowed at both ends
                    I got this to make a cabinet door for a project I'm working on. Unfortunately, the panel is bowed on each end so it's useless to me. While I'm sure I'll find another use for the wood, I'm disappointed because it won't be used for what I meant to use it for. I probably wouldn't care as much if I could trim off the bowed sections, but it's a large door so that's not possible. Because this isn't sold in stores, you can only hope that the piece that you get isn't bowed. Based on other reviews, it seems to be hit or miss.
                    by
                    Response from Columbia Forest ExpertNov 22, 2015
                    Hello, We do regret the panel arrived bowed and would like to offer a new panel on us. Please contact Kevin at kcrisp@cfpwood.com for a replacement. ColumbiaForestProducts
                    2 found this review helpful
                    1/2" panel bowed so horribly
                    I ordered the 1/2" panel which arrived so horribly bowed, that I cannot use it for any of the projects I wanted to make. The only thing I think I can do with it is use it for furring strips...maybe not even that. The 3/4" panel i ordered arrived in perfect condition in the same shipping box. Very disappointed, hopefully I just got unlucky with this particular panel.
                    by
                    Response from CFP Customer ServiceMay 15, 2026
                    I apologize for the warping you had with your material. Unfortunately, it is a natural product and has the potential to move and react to different environments, especially during during the transition months. We will gladly work with you to assist, and your local Home Depot should be able to provide a refund. Thanks - Michael
                    1 found this review helpful
                    Nice smooth sanded plywood already primed. Excellent product
                    by
                    This customer chose to rate the product and not provide text.
                    by
                    • Verified Purchase
                    This customer chose to rate the product and not provide text.
                    by
                    Nice quality
                    Really nice quality, no splintering, custom cut was PERFECT. no warps. Priming was great, the material took paint really well.
                    by
                      Showing 1-10 of 49 reviews

                      Compare Key Features

                      current item

                      Product Snapshot

                      Ideal for eco-conscious DIYers, this formaldehyde-free plywood panel offers a sustainable and healthy choice for interior projects.
                      Ideal for DIYers and professionals, this panel offers exceptional moisture resistance and a pre-sanded surface for easy finishing.
                      Perfect for upgrading your home with natural cherry wood, adding style and functionality. This panel is water-resistant, formaldehyde-free, and easy to finish.
                      Ideal for environmentally conscious DIYers and professionals, this plywood offers formaldehyde-free construction and beautiful hardwood veneer. Its water-resistant composition ensures stability, making it perfect for various interior projects.

                      Panel Dimensions

                      0.453 in. x 24 in. x 24 in.
                      0.4 in. x 24 in. x 24 in.
                      L 24 in., W 24 in., Thickness 0.4 in.
                      0.453 in. x 24 in. x 48 in.

                      Material Type

                      Poplar Hardwood Plywood
                      Hickory hardwood plywood
                      Cherry Wood
                      Poplar Hardwood

                      Surface Finish

                      Pre-primed
                      Decorative hickory veneer
                      Smooth
                      Decorative Poplar Veneer

                      Moisture Resistance

                      Pre-sanded Surface