#1 Home Improvement Retailer

Internet # 205410011

Model # 4276

The product you chose is discontinued, but we found something similar you might like.
6 in. 2.1 Amp Single Speed Bench Grinder with Flexible Work Light
  • WEN
  • Model BG4276
  • Internet #316329182
  • Store SO SKU #1006211758
6 in. 2.1 Amp Single Speed Bench Grinder with Flexible Work Light
(233)
Discontinued Model:

Product Images

2.1 Amp 6 in. Bench Grinder with Flexible Work Light

Apply Now
6 Months Everyday Financing** available on purchases of $299 or more. Apply Now
  • Powerful speed prevents unwanted edges and rust
  • Equipped with a 60-grit wheel and a 36-grit wheel
  • Includes light for maximum precision and stability
  • View More Details

Free & Easy Returns In Store or Online

Return this item within 90 days of purchase.

Read Return Policy

Ask about this product

Get an answer now with AI

Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information

Product Details

About This Product

Remember when you spent all that money replacing dull rusty tools. From debarring ragged edges to cleaning objects to sharpening blades, the WEN 6 in. Bench Grinder is the ideal companion for any workshop. These machines allow for simple resuscitation of dull blades, scissors, screwdrivers and more. Compact yet powerful, the WEN 6 in. Bench Grinder provides reliability even in the face of the most difficult tasks. Our package includes two 6 in. by 3/4 in. wheels: a 60-grit wheel for material removal and general purpose grinding and a coarse 36-grit wheel for faster material removal. With our quiet 2.1 Amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. This fast speed is ideal for demurring unwanted edges and rust removal. Built with you in mind, our design makes wheel guard removal simple for easy wheel changes. The included eye guards can adjust to prevent them from interfering with your project. Also, don't forget about the flexible work light helping to illuminate your grinding for an increase in accuracy and precision. Of course, as with all WEN Products, our 6 in. Bench Grinder is covered with a 2-year warranty, a friendly and knowledgeable customer service hotline and a national service network. No need to waste any more money on new tools. The WEN 6 in. Bench Grinder will save you money by leaving all of your tools as sharp and clean as the day you bought them. Remember WEN.

Highlights

Product Information

Internet # 205410011

Model # 4276

Additional Resources

Shop All WEN

Specifications

Dimensions: H 8.7 in, W 17.9 in, D 9.5 in

Dimensions

Product Depth (in.)

9.5 in

Product Height (in.)

8.7 in

Product Width (in.)

17.9 in

Wheel Diameter (in.)

6 in

Details

Amperage (A)

2.1

Bench & Stationary Tool Type

Bench Grinder

Color Family

Yellow

Dust Collection Method

None

Eye shields

Yes

Maximum Speed (RPM)

3450 RPM

Portability

Bench

Power Tool Features

No Additional Features

Product Weight (lb.)

17 lb

Returnable

90-Day

Tools Product Type

Power Tool

Warranty / Certifications

Certifications and Listings

ETL Listed

Manufacturer Warranty

Limited two year warranty.

Questions & Answers

Is the light bulb included
ByJun 23, 2026
0 Answer | 
Answer This Question

How many hp?
ByJun 8, 2026
0 Answer | 
Answer This Question

Why is this grinder cheaper than the exact grinder without the light?
ByMay 9, 2026
0 Answer | 
Answer This Question

What is the RPM of this Grinder
ByApr 25, 2026
0 Answer | 
Answer This Question

What size arbor is on this unit?
ByApr 24, 2026
0 Answer | 
Answer This Question

What is the bottom base dimension?
ByMar 18, 2026
0 Answer | 
Answer This Question

What is the horsepower for the motor?
BySep 25, 2025
0 Answer | 
Answer This Question

What is the horse power of this grinder
ByJun 19, 2025
0 Answer | 
Answer This Question

Viewing 1-8 of 44

Customer Reviews

4.3 out of 5

  • 4.3 out of 233 reviews
  • 84% recommend this product
Filter by:
Showing 1-10 of 233 reviews
Nice grinder, easy setup.
This is a single speed unit. Lightweight at around 15 pounds. The light bulb is not included; a bulb up to 40 watts can be used. Spin up of the wheels is acceptably fast while spin down takes quite awhile; there is no "instant stop". The face shields are well made and adjustable. In my application I removed one of the wheels and replaced it with a wire brush wheel. Make sure, if you do something similar, to verify that the replacement will support the max RPM and fit the shaft. Details are in the user manual. I've installed this unit in my garage; I have it's "big brother" the WEN variable speed grinder installed in my basement. It weighs twice as much as this single speed grinder and I wanted something easy to move around the garage. In use the machine works as advertised; fit and finish is very good. If undue vibration occurs you might try dressing the grinding wheel(s); a dressing tool is not included with this model but they're readily available and videos on performing the chore can be found on the Internet. (The variable speed WEN does come with a dressing tool, along with a drill bit sharpening rest).
by
    • Recommended
    re-invent this wheel
    bought this bench grinder for sharpening my 42” mower blades when I position blade on grinder tool rest the other end of blade touches other wheel (it too is spinning), its disruptive while grinding the one end. I don't know if this happens to everyone so trying to figure out a way. Also the tool rest needs to be able to adjust at an angle and not lock horizontally. Had no problems with assembly. Its ok i have the 6” grinder maybe shoulda spent more on 8” grinder.
    by
      • Recommended
      6" Wen bench grinder
      Received this today. We'll packaged. Easy to assemble. Switched fine stone to left wheel and placed a Dewalt wire wheel on right maintained speed under load.
      by
        • Recommended
        As almost everybody I read through negative comments first and...
        As almost everybody I read through negative comments first and was scared buying this, but eventually went with it because I am running out of real estate in my shop and I need something with low profile to handle occasional grinding polishing and buffing I need about 5-10 times a month. For this duty cycle, this is the perfect bench grinder and I have to say, none of what I read in the negative reviews came true with my grinder. First of all, I love the size. It is small, yet powerful enough, doesn't bog down even when I put more than the needed pressure to complete an even and consistent grind. The 2.1 Amp motor has plenty of power to turn the 6" x 3/4" grinding wheels at 3450 RPMs. It takes no more than 2-3 seconds to reach top speed. Ventilation of the motor has been designed very precisely so as to keep it from sucking in metal shavings and is placed at the bottom. Design is very smart and employs more than a few curves and paths to filter out even the finer particles under prolonged operation in dirty spaces. Secondly, right out of the box, everything was exceptionally well balanced. No wobble, no vibrations, no rattling, just a nice even and consistent grinding surface on both sides. Noise level is minimal, and although I wouldn't advise against wearing hearing protection, I measured 45 db at 5' front. I've been in noisier libraries to say the least. Design and manufacturing is great, and at that price it is a steal and a must have in a shop or small garage. For more information, please watch my video: https://youtu.be/lnFR1H8VDlg
        by
        • Verified Purchase
        2 found this review helpful
        I am enjoying my Bench Grinder I also bought the Wen Stand and added locking casters to go with i...
        I am enjoying my Bench Grinder I also bought the Wen Stand and added locking casters to go with it. I can move it anywhere I want to and it does not make very much noise. Probably going to add a wire wheel next.
        by
          • Recommended
          Pretty nice little tool for sharpening knifes, chisels or grinding small pieces of metal. Motor o...
          Pretty nice little tool for sharpening knifes, chisels or grinding small pieces of metal. Motor of 1/3 HP spins two wheels #36 and #60 with up to 3450 RPM (no load). It comes with a lamp (bulb not included) which can only be turned on when the wheels are in motion. Shipping was prompt, tool well packed. Assembly took 5 or 10 minutes. You need to screw on eye shields made of transparent plastic, metal tool rests and spark deflectors. I mounted mine with a use of two screws onto the bench I made for it and a drill press. After turning it on it was slowly moving due to the vibration so it was necessary. However you wont feel that vibration, the motor is also very quiet.
          by
          • DIY
          • Recommended
          1 found this review helpful
          Good for tool sharpening
          Nice for a lightweight grinder. Sharpened my chisel set with it, holds very steady without much vibration. Engine showed only slight slowing on a chisel, but I wouldn't expect to go much bigger. Compared to my old (ungrounded and unshielded) grinder, this is very light and low powered. Still, the eye and spark shielding are nice. The 2 grit wheels give you some control over level of sharpening. One annoying aspect, the light can only turn on when the grinder is one... so you can't use it while setting up or as a bench light.
          by
          • Recommended
          10 found this review helpful
          Good value, gets the job done
          My great uncle was a carpenter and he always told me the importance of having sharp tools. With this bench grinder I can keep my chisels, knifes, scissors and other blades sharp. It was packaged well and assembly was easy. I purchased two 3 inch 1/4" bolts to mount it to my bench. I had to cut the bolts down about 1/4" for them to slide into the mounting holes.The grinder is pretty level but vibrates my work area a little when running. To help alleviate that, I loosened the bolts a pinch so the rubber bushing below the grinder can take some of the vibration. I purchased a 40w bulb like the instructions said but the smallest one I can get still pokes out from the lamp. It is a risk I will take. I first sharpened a chisel with the grinder. The tool rests are both hard, if not impossible, to get plumb with the wheels. I was able to work around it though and get a sharp, new blade. The wheel guards and spark arrestors safely caught the sparks. Very few hit the clear guards.I have before and after photos of the chisel. The before photo is after I did a little grinding. Overall, it is a good grinder for small jobs. I need a second work bench and will probably re-mount it there. The power cord is about 6 feet long which is helpful.
          by
          • Recommended
          9 found this review helpful
          This customer chose to rate the product and not provide text.
          by
          • Verified Purchase
          Meets all expectations. Great service and prompt delivery !
          by
          • Verified Purchase
          Showing 1-10 of 233 reviews