10 in. 5 Speed Drill Press with EXACTLINE Laser Alignment System

Remember when you could drill with maximum accuracy. Power through metal, wood, plastics, and more with the WEN 8 in. 5-Speed Drill Press. Don't let our compact design fool you. Between the 5 operating speeds, the 2 in. spindle travel, and the sturdy construction, you'll have way more precision than a standard handheld drill. Our 2.3 Amp induction motor features ball bearings for smooth balanced performance even at high speed. Manually set your speed to either 750, 1100, 1500, 2100, or 3200 RPM by adjusting the belt position on the 2 spindles. The easy-to-read, locking depth stop allows for accurate and repeatable drilling operations. The keyed chuck with JT33 spindle taper accepts bits ranging from 1/20 to 1/2 in. Dia (1.5 to 13 mm). The table bevels 45° left and right for angled drilling. The base is designed with holes for mounting onto a bench or work stand. Clamps and vises are easily mounted to the slotted table, making work-holding safe and effective. And because its a WEN product, your drill press comes backed by a 2-year warranty, a stocked inventory of replacement parts, and a helpful customer phone line. Remember when you could drill holes in almost anything? Remember WEN.

Remember when power tools were actually powerful. The wen 12-inch variable speed drill press powers through metal, wood, plastic and more, with the ability to drill up to a 5/8-inch hole through heavy-duty, 1-inch-thick cast iron. The mechanical variable speed allows you to target in the exact rpm (from 580 to 3100) for your project with the simple turn of a lever while the digital led readout displays the current speed. The powerful induction motor features ball bearings for an extended life and balanced performance. The 5/8-inch chuck with mt2 spindle taper gives you versatility with a variety of bits, with on-board chuck key storage for easy organization. The 9-1/2 by 9-1/2 in. cast-iron worktable bevels 45° left and right for those tricky operations. The x-pattern laser shows your drill's center points, saving on guesswork and sparing expensive materials. The 10 by 16 in. cast iron base features predrilled holes for easy mounting to the benchtop or work surface of your choice while the onboard light keeps your workpieces illuminated for maximum accuracy. And because it's a wen product, your drill press comes backed by a two-year warranty, a friendly customer support line, and a stocked inventory of replacement parts. Remember when you could drill with laser precision. Remember wen.

The Shop Fox W1667 8-1/2" Oscillating Drill Press is both a drill press and an oscillating sander in one compact machine.The W1667 is fitted with a JT33 keyed drill chuck, offers up to 2" of travel and a drilling capacity of 1/2" through mild steel.The 1/2 HP motor smoothly powers the five spindle speeds ranging from 550 to 3000 RPM. A sanding spindle is included for use with drums ranging in size from 1" to 2" in diameter and is 4-1/4" long. Purchasing additional drums and sleeves will allow you to sand small or finely detailed pieces. With the oscillating feature, your abrasives will last longer and provide a better finish. The 7" by 7" table allows surfaces to be sanded at many different angles as it tilts 90° in both directions. Included are table inserts to give maximum support for the workpiece and a dust port for connection to your dust collection system.

Remember when power tools were actually powerful. The WEN 12 in. Variable Speed Drill Press powers through metal, wood, plastic and more, with the ability to drill up to a 5/8 in. hole through heavy-duty, 1 in. T cast iron. The mechanical variable speed allows you to target in the exact RPM (from 580 to 3200) for your project with the simple turn of a lever while the digital LED readout displays the current speed. The powerful induction motor features ball bearings for an extended life and balanced performance. The 5/8 in. chuck with MT2 spindle taper gives you versatility with a variety of bits, with on-board chuck key storage for easy organization. The 9-1/2 in. x 9-1/2 in. cast-iron worktable bevels 45° left and right for those tricky operations. The X-pattern laser shows your drill's center points, saving on guesswork and sparing expensive materials. The 10 in. x 16 in. cast iron base features predrilled holes for easy mounting to the benchtop or work surface of your choice while the onboard light keeps your workpieces illuminated for maximum accuracy. And because it's a WEN product, your drill press comes backed by a 2-year warranty, a friendly customer support line, and a stocked inventory of replacement parts. Remember when you could drill with laser precision. Remember WEN.