
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
The Coil Sliding Nailer is ideal for your siding and fencing applications. Durably built with aluminum housing to withstand tough jobs, the nailer is also lightweight enough for user comfort. Its tool-free adjustable exhaust adds convenience while you work.
Dimensions: H 6.3 in, W 15 in, D 15 in
Air Inlet Size (in.) | 1/4 in |
|---|---|
Nail Angle | 15 degree |
Nail Gauge | NA |
Product Depth (in.) | 15 in |
Product Height (in.) | 6.3 in |
Product Width (in.) | 15 in |
Cordless/Corded | Corded |
|---|---|
Included | No additional components or accessories are included |
Included | Tool Only |
Loading Type | Coil |
Maximum Fastener Size | 2-1/2 in |
Minimum Fastener Size | 1-1/4 in |
Minimum Recommended Air Delivery SCFM @ 90PSI | 3.3 |
Minimum Recommended Operating Pressure (psi) | 70 PSI |
Multi-Purpose | Single Purpose |
Nailer Features | Adjustable Exhaust Port, Fastener Collation, Fastener Depth Control |
Power Type | Pneumatic |
Returnable | 90-Day |
Tool Weight (lb.) | 6.4 lb |
Tools Product Type | Air Tool |
Yes, you can use 1-3/4 inch hot-dipped galvanized shank siding nails in the DW66C-1.
2-1/2 inches.
The DW66C-1 is a suitable option for installing side-lap Hardie board siding when used with the correct coil nails and with the depth adjusted for proper penetration. However, it is not designed for structural framing applications.
To adjust the depth on the DEWALT DW66C-1, rotate the depth control adjustment wheel to set the desired nail drive depth. Always disconnect the air supply and avoid contact with the trigger during adjustments for safety.
The DW66C-1 is a specifically designed for siding, and it does not accept standard roofing coil nails.
Yes, the DW66C-1 has a 3 year limited manufactures warranty.
The DW66C-1 uses 1-1/4" -2-1/2" ,15-degree plastic insert or wire weld fasteners.
Yes, the DW66C-1 is designed to shoot 1-1/4” to 2-1/2” nails.
Viewing 1-8 of 97
4 out of 5